2222 338 24684 Vishay, 2222 338 24684 Datasheet - Page 18

• Manufacturer Part Number: 2222 338 24684
• Manufacturer: Vishay

Specifications of 2222 338 24684

• Tolerance (+ Or -): 20%
• Voltage: 310VAC
• Temp Coeff (dielectric): PLYP
• Mounting Style: Through Hole
• Construction: Radial
• Failure Rate: Not Required
• Seated Plane Height: 18mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 18mm
• Product Depth (mm): 8.5mm
• Product Length (mm): 26mm
• Lead Spacing (nom): 22.5mm
• Lead Diameter (nom): 0.8mm
• Operating Temp Range: -55C to 110C
• Capacitance: .68uF
• Package / Case: Not Required
• Lead Free Status / RoHS Status: Compliant

Document Number: 28119
Revision: 16-Jul-09
SUB-CLAUSE NUMBER AND
TEST
SUB-GROUP C4
4.15
4.15.1 Initial measurements
4.15.3 Final measurements
SUB-GROUP C5
4.16
SUB-GROUP C6
4.17
SUB-GROUP C7
4.18
Charge and discharge
Radio frequency
characteristic
Passive flammability
Class B
Active flammability
Interference Suppression Film Capacitors
CONDITIONS
10 000 cycles
Charge to 435 Vdc
Discharge resistance:
Capacitance
Tangent of loss angle:
Capacitance
Tangent of loss angle
Insulation resistance
Resonance frequency
Bore of gas jet: Ø 0.5 mm
Fuel: butane
Test duration for actual volume V in mm³:
V ≤ 250: 10 s
250 < V ≤ 500: 20 s
500 < V ≤ 1750: 30 s
V > 1750: 60 s
One flame application
20 cycles of 2.5 kV discharges on the test
capacitor connected to U
R
=
For C ≤ 1 µF at 10 kHz
For C > 1 µF at 1 kHz
-------------------------------------------------- -
1.25 x C dU dt
For technical questions, contact:
435 Vdc
MKP Radial Potted Type
(
⁄
)
Rac
[e-mail]
PERFORMANCE REQUIREMENTS
¦ΔC/C¦ ≤ 10 % compared to values measured in
4.15.1.
Increase of tan δ:
≤ 0.008 for: C ≤ 1 µF or
≤ 0.005 for: C > 1 µF
Compared to values measured in 4.15.1.
≥ 50 % of values specified in section “Insulation
Resistance” of this specification
≥ 0.9 times the value as specified in section
“Resonant Frequency” of this specification
After removing test flame from capacitor, the
capacitor must not continue to burn for more than
10 s. No burning particle must drop from the
sample.
The cheese cloth around the capacitors shall not
burn with a flame.
No electrical measurements are required.
Vishay BCcomponents
MKP 338 2 X2
www.vishay.com
162