UDS100-B Lantronix, UDS100-B Datasheet - Page 23

• Manufacturer Part Number: UDS100-B
• Description: Ethernet Modules & Development Tools Single Port
• Manufacturer: Lantronix
• Type: Serial to Ethernetr

Specifications of UDS100-B

• Data Rate: 300 bps to 115.2 Kbps
• Product: Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

UDS10/UDS100 User Guide
3. Select an option on the Change Setup menu by entering the number of the
4. To enter a value for a parameter, type the value and press Enter. To confirm a
5. When you are finished, save the new configurations (option 9). The unit reboots.
Using the Serial Port
For local configuration, connect a terminal or a PC running a terminal emulation
program to the unit’s serial port (channel 1). Configure the terminal (or emulation) for
9600 baud, 8-bit, no parity, one stop bit, and no flow control.
1. Cycle the unit’s power (power off and back on). After power-up, the self-test
option in the Your choice ? prompt and pressing Enter.
current value, just press Enter.
begins and the diagnostic and status LEDs start blinking.
Figure 5-2. Setup Mode
Configuring the UDS Using Telnet or the Serial Port
23