SUPERPRO-3000U-100 Xeltek, SUPERPRO-3000U-100 Datasheet - Page 53

• Manufacturer Part Number: SUPERPRO-3000U-100
• Description: Programmers & Debuggers USE 674-SP3000U-100
• Manufacturer: Xeltek

Specifications of SUPERPRO-3000U-100

• Positions/sockets: 1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: Common ICs

1)
loaded to buffer.
Unmatched file to this chip: this means this POF file is not for this chip, please replace it with a matched
one.
The POF file has errors:
Load POF file dll error (not found): the secondary file has errors; please contact technical support.
2)
mode when loading the file next time.
5.2 Adapter Selection
The programmer is equipped with a ZIF socket and is designed to accept DIP devices with 48 pins (40
pins for Superpro Z) or less. Adapters are required to accept non-DIP devices or devices with more than
48 pins. There are two types of adapter, universal and specific. Universal adapters are applicable for all
devices of same packaging and leads. Specific adapters are applicable for certain devices only.
Why are specific adapters required?
Technology in IC packaging is evolving and new package types have been introduced over time,
therefore adapters are needed in order to accommodate the devices come in different package types or
with more pins or leads.
For the devices with pins between 48 and 100, if using a universal adapter, users need an expander to
expand from the 48 pin driver to 100 pin driver; while for common devices the specific adapter is able to
transform the device to a 48-pin directly. At this point, user has two options, one is using a universal
adapter, and the other is using a specific adapter. The thing to pay attention to is be careful when
determining the device names during selecting. For example, if using universal adapter, the user should
select
For 100pin or more devices, the specific adapter is required.
How to select the correct types of adapter?
After device selection, if the device required an adapter, the Adapter dialogue box will pop up. It
includes the type of the adapter and the size of applicable chip. For example,
POF file, which is created by compiler, will be transformed to Fuse data and be checked when
Other formats. Mainly the JED file. The data will save in a JED file after reading the chip. Use this
87C196KC@PLCC68
(universal adapter), otherwise select
87C196KC@PCC68
(special adapter).