SX-550-0700 Silex Technology, SX-550-0700 Datasheet - Page 108

• Manufacturer Part Number: SX-550-0700
• Description: WiFi / 802.11 Modules & Development Tools Wired Internal OEM 10/100 Serial Server
• Manufacturer: Silex Technology

Specifications of SX-550-0700

• Interface Type: RS-232, SPI
• Security: 802.1x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SH POWER
SET LOAd ENable
SET LOAd HOst
SET LOAd IP
SET LOAd SOftware
SET LOAd TFTP
SET LOAd XModem
SH LOAd
Firmware Update
Part Number 40183-101
Command
Sets the firmware to perform a soft reset and enter the server boot program after the
next Exit command.
This command is used for diagnostic purposes only.
The default value is Disable.
Format:
Sets the node name of the Netware boot host.
This command is used for diagnostic purposes only.
The default value is null>\
Format:
Sets source computer IP address for TFTP get operation.
The default value is 0.0.0.0.
Format:
Sets filename on host for TFTP get update
Format:
Initiates firmware update using TFTP get operation.
The TFTP server address must be set using SET LOAd IP and the filename using
SET LOAd SOftware. The server will reset after the firmware update is completed.
Format:
Initiates firmware update using the XModem protocol on the serial console
The server will reset after the firmware update is completed.
Format:
Shows the firmware update parameters
Sample output:
SET LOAd (ENable | DIsable ]
SET LOAd HOst
SET LOAd IP
SET LOAd SOftware
SET LOAd TFTP
SET LOAd XModem
Firmware load is disabled
Load Host IP
Table 42 Firmware Update
Shows the current power control mode.
Silex SX-550 Developer's Guide
aa.bb.cc.dd
= 0.0.0.0
<name>
<filename>
Description
Page 100