SX-550-0700 Silex Technology, SX-550-0700 Datasheet - Page 61

• Manufacturer Part Number: SX-550-0700
• Description: WiFi / 802.11 Modules & Development Tools Wired Internal OEM 10/100 Serial Server
• Manufacturer: Silex Technology

Specifications of SX-550-0700

• Interface Type: RS-232, SPI
• Security: 802.1x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Part Number 40183-101
Verify the settings, as defined in Table 19.
To change the Telnet/HTTP password, click Telnet/HTTP Password. The Change Password window
displays.
Type the new password in the New Password field, then in the Verify Password field.
Click OK to change the password or click Cancel to exit.
Click Advanced TCP/IP. The Advanced TCP/IP Configuration window displays.
IP Address
Resolution
Subnet Mask
Default Gateway
WINS Server
Use DHCP to
Locate WINS
Server
Parameter
Sets the exchanges among network interfaces
connected to an Ethernet media segment and maps IP
address to Ethernet addresses, Media Access Control
(MAC) addresses and hardware addresses.
The Set Permanent radio button sets the IP address
permanent. The IP address must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255.
The Use Network Protocol Select radio button
determines which IP address at power up.
Sets the address of the subnet mask
The subnet mask must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255. The default subnet mask is 0.0.0.0.
The server interprets a subnet mask of 0.0.0.0 or
255.255.255.255 as no subnet mask specified.
Sets the default gateway, if your network is attached to
other networks
Sets the Windows Internet Naming Service (WINS)
address
Values are set by user.
Uses the automatic location feature in ExtendView to
locate the WINS servers.
Figure 9 Change Password Window
Table 19 TCP/IP Settings
Silex SX-550 Developer's Guide
Setting
Page 53