ZFSM-201-1-B CEL, ZFSM-201-1-B Datasheet
![Zigbee / 802.15.4 Modules & Development Tools Freestar Pro Module 100mW PCB Trace Ant](/photos/26/96/269657/zfsm-201_sml.jpg)
ZFSM-201-1-B
Specifications of ZFSM-201-1-B
Related parts for ZFSM-201-1-B
ZFSM-201-1-B Summary of contents
Page 1
... RF transceiver solution for 2.4 GHz IEEE 802.15.4, ZigBee, and Zigbee PRO wireless networks. The FreeStar Pro module is based on the Freescale™ MC13224V (ZFSM-201-1) or MC13226V (ZFSM-201-2) transceiver platforms. It combines Freescale’s transceiver IC with an onboard 100mW Power Amplifier. Ideal for remote sensing, AMR/AMI, home and building ...
Page 2
... The FreeStar Pro kit also serves as an invaluable aid in application development. Through the many headers on the interface board, the user has access to all pins on the ZFSM-201-1 enabling easy connection to the target system for application development. The FreeStar Pro module contains the Freescale™ MC1322xV transceiver IC, an NEC high gain Power Amplifier, XTALs, Power Regulator, and an integrated PCB antenna ...
Page 3
... Host Protocol Interface Commands...................................................................................................................................................... Electrical Specification Absolute Maximum Ratings................................................................................................................................................................... Recommended (Operating Conditions)................................................................................................................................................ DC Characteristics.................................................................................................................................................................................. RF Characteristics.................................................................................................................................................................................. Pin Signal & Interfaces Pin Signals I/O Configuration................................................................................................................................................................ I/O Pin Assignments............................................................................................................................................................................... Module Dimensions................................................................................................................................................................................ Processing Agency Certifications Shipment, Storage & Handling References & Revision History ZFSM-201 Series Page ...
Page 4
... In the overall design, ensure that wiring and other components are not placed near the antenna. Do not place the antenna in a metallic or metallized plastic enclosure. • Keep plastic enclosures 1cm or more from the antenna in any direction. • ZFSM-201 Series Page 4 ...
Page 5
... The module can be awoken from the low-power modes in 3 ways, wake-up can occur: On external interrupts through any of the 4 Keyboard Interface inputs • From internal interrupts • On the Real Time (wake-up) timer interrupt • For more detail information on modes of operation refer to Freescale’s MC1322xV datasheet available at Freescale’s website (www.freescale.com) ZFSM-201 Series Page 5 ...
Page 6
... The FreeStar Pro module has all major pins routed to the castellation connectors, this includes, but is not limited, to the pins for JTAG, serial communication, A/D, etc. Min Typ Max Unit V 0.95 V 0.40 105 200 µsec TX Mode RX Mode High Low Low High Page 6 ZFSM-201 Series ...
Page 7
... Hibernate or Doze Mode Current Min Max -0.3 3.6 -0.3 VCC + 0.2 10 -45 125 260 Min Typ Max 2.1 3.6 - 3.3V unless otherwise noted) CC Typ Max Unit 193 µA Page 7 ZFSM-201 Series http://www.cel.com Unit VDC VDC dBm °C °C Unit VDC °C MHz ...
Page 8
... The FreeStar Pro module has 60 edge I/O interfaces for connection to the user’s host board. the 60 edge castellations. = 3.3V unless otherwise noted) CC Min Typ 2400 250 -92 - Page 8 ZFSM-201 Series Max Unit 2483.5 MHz kbps dBm dBm dBm dB dB Figure 1 shows the layout of ...
Page 9
... Alternate function: GPIO18UART2 TX data output GPI017 Alternate function: UART1 Request to Send input GIO016 Alternate function: UART1 Clear to Send output GPIO13 Alternate function: I2C Bus data GPIO12 Alternate function: I2C Bus clock GPIO11 Alternate function: Timer 3 IO signal Page 9 ZFSM-201 Series IC Pin # ...
Page 10
... Alternate function: Keyboard Interface Bit 5 GPIO26 Alternate function: Keyboard Interface Bit 4 GPIO25 Alternate function: Keyboard Interface Bit 3 GPIO24 Alternate function: Keyboard Interface Bit 2 GPIO23 Alternate function: Keyboard Interface Bit 1 GPIO22 Alternate function: Keyboard Interface Bit 0 / Host Walk-up output GND GND GND Page 10 ZFSM-201 Series IC Pin # ...
Page 11
... MODULE DIMENSIONS Dimensions in inches. Tolerances = +/-0.005” unless otherwise noted. FreeStar PRO ZFSM-201-x 1.000” ZFSM-201 0006-00-00-00-001 C11 ISSUE C30 Pin 1 RF Shield 1.413” C12 Pin 21 C7 Pitch = 0.05” FreeStar PRO ZFSM-201-xC 1.000” ZFSM-201-1C C6 0006-00-00-00-001 C11 ISSUE C30 ...
Page 12
... MODULE LAND FOOTPRINT NOTE: Dimensions in inches. Tolerances = +/-0.005” unless otherwise noted. 0.050 [1.26] COPPER KEEPOUT AREA 0.104 [2.65] 1.100 [27.93] 1.000 [25.40] 0.308 [7.82 0.100 [2.54] 0.890 [22.61] Figure 2 Page 12 ZFSM-201 Series 0.050 [1.27 0.040 [1.02] ...
Page 13
... After soldering the Module to the host board, consider optical inspection to check the following: • Proper alignment and centering of the module over the pads. • Proper solder joints on all pads. • Excessive solder or contacts to neighboring pads, or vias. Repeating Reflow Soldering Only a single reflow soldering process is encouraged for host boards. Page 13 ZFSM-201 Series ...
Page 14
... The OEM using the FreeStar Pro Module must only use the approved antenna, (PCB Trace Antenna) that has been certi- fied with this module. The OEM using the FreeStar Pro Module must test their final product configuration to comply with Unintentional Radiator Limits before declaring FCC compliance per Part 15 of the FCC rules. Page 14 ZFSM-201 Series ...
Page 15
... The CE mark must be a minimum of 5mm in height · The CE marking must be affixed visibly, legibly, and indelibly Since the 2400 - 2483.5 MHz band is not harmonized by a few countries throughout Europe, the Restriction sign must be placed to the right of the `CE' marking as shown in the picture Page 15 ZFSM-201 Series ...
Page 16
... According to JEDEC ISP, the FreeStar Pro Modules are moisture sensitive devices. Appropriate handling instructions and precautions are summarized in Section 2.1. Read carefully to prevent permanent damage due to moisture intake. Moisture Sensitivity Level (MSL) MSL 3, per J-STD-033 Storage Storage/shelf life in sealed bags is 12 months at <40°C and <90% relative humidity. Page 16 ZFSM-201 Series ...
Page 17
... To minimize risks of damage to property or injury (including death) to persons arising from defects in CEL products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. Page 17 ZFSM-201 Series Page N/A N/A ...