7-338069-8 TE Connectivity, 7-338069-8 Datasheet - Page 3

• Manufacturer Part Number: 7-338069-8
• Description: SOCKET, TOP ENTRY, SMT, 8WAY
• Manufacturer: TE Connectivity
• Type: FFC Connectorr
• Series: Micro-MaTchr

Specifications of 7-338069-8

• Contact Gender: F
• Mounting Style: Surface Mount
• Number Of Contact Rows: 2
• Number Of Contacts: 8POS
• Pitch (mm): 2.54mm
• Body Orientation: Straight
• Contact Resistance Max: 10mOhm
• Operating Temp Range: -40C to 105C
• Housing Material: Polyamide 4.6
• Housing Color: Red
• Contact Material: Phosphor Bronze
• Contact Plating: Tin Over Nickel
• Termination Method: Solder
• Product Height (mm): 5.3mm
• Product Depth (mm): 5mm
• Product Length (mm): 14.7mm
• Connector Type: Board To Board
• Pitch Spacing: 1.27mm
• No. Of Rows: 1
• No. Of Contacts: 8
• Gender: Receptacle
• Contact Termination: Surface Mount Vertical
• Contact: RoHS Compliant
• Rohs Compliant: Yes
• Product Type: Connector
• Type Of Connector: Female-On-Board
• Mount Angle: Vertical
• Pcb Mount Style: Surface Mount
• Mating Connector Lock: With
• Polarization: With
• Number Of Positions: 8
• Locking Latch: With
• Centerline (mm [in]): 1.27 [0.050]
• Vacuum Tape: With
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Tin
• Housing Entry Style: Top
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Packaging Method: Reel
• Packaging Quantity: 900
• Lead Free Status / RoHS Status: Compliant

.
3.3.3
Male-on-board connector assembly, consisting of a number of contact pins, press-fit in a moulded
housing.
3.3.4
Male-on-wire connector assembly, consisting of a number of contact with slotted beam section, press-fit in
a moulded housing, The connector features a cable cover, pre-loaded on the housing.
3.3.5
Paddle board connector assembly, consisting of a number of contact with slotted beam section, press-fit
in a moulded housing. The connector features a cable cover, pre-loaded on the housing.
After the application of the cable, the connector assembly is soldered in the PC board thus providing a
reliable and cost-effective permanenet connection of ribbon cable to the PC-board.
3.3.6
Top entry, consisting of a number of contact springs press-fit in moulded housings.
3.3.7
Bottom entry, consisting of a number of contac springs, press-fit in moulded housings. The housing is
partly falling in the PCB, causing a low built-in height.
3.3.8
The cosi connector is a male-on-wire connector designed for discrete wires.
Contacts can be terminated to the wire with a semi-automatic stripper crimper or with a dedicated
handtool, and manually inserted into the housing.
3.4
With the connector versions, mentioned in section 3, the following interconnections can be realised
•
•
•
•
•
•
•
Rev. F
R6-77 (Rev. 07-01)
Wire-to-board connection with the cable parallel to the PC board.
Wire-to-board connection with the cable perpendicular to the PC board .
Board-to-board connection with two parallel boards (sandwich configuration)
Board-to-board connection with the perpendicular PC boards (mother/daughter board
configuration)
Wire-to-board and/or Board-to-board connections with the connector system positioned on the
solder side of the PC board -for instance Surface Mount Application-
Permanent connections of ribbon cable to PC board, using the Paddle board connector version.
Wire-to board connection with discrete wires.
Male-on-board connector
Male-on-wire connector
Paddle board connector
Female-on-board SMD connector.
Female-in board SMD connector.
Male on wire COSI (Crimp On Snap In) connector
Application
108-19052
Page 3 of 15