1766161-1 TE Connectivity, 1766161-1 Datasheet - Page 10

• Manufacturer Part Number: 1766161-1
• Description: CONTACT,PIN,#8 LOCK, #10 CRIMP BARREL
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: Elcon ICCONr

Specifications of 1766161-1

• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Pitch (mm): Not Requiredmm
• Contact Material: Brass
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Silver
• Rohs Compliant: YES
• Product Type: Contacts
• Pin Or Socket: Pin
• Contact Termination: Crimp
• Wire Gauge: 8-10 AWG
• Contact Finish: Silver
• Contact Finish Thickness: 200µin (5.08µm)
• Current Rating: 35A
• Product Line: ICCON
• Wire/cable Type: Discrete Wire
• Termination Method To Wire/cable: Crimp
• Mating Post Length (mm [in]): 11.94 [0.470]
• Mating Retention Type: Lock
• Contact - Rated Current (a): 35
• Hot Pluggable: No
• Operating Voltage Reference: AC
• Operating Voltage (vac): 250
• Wire/cable Size (awg): 8 – 10
• Wire/cable Size (mm²): 5 – 8
• Wire/cable Size (cma): 9,072.29 – 16,774.96
• Profile Height (y-axis) (mm [in]): 3.56 [0.140]
• Mating Retention: With
• Number Of Positions: 1
• Length (x-axis) (mm [in]): 11.94 [0.470]
• Width (z-axis) (mm [in]): 7.62 [0.300]
• Contact Type: Pin
• Contact Base Material: Copper
• Contact Plating, Mating Area, Material: Silver
• Contact Plating, Mating Area, Thickness (µm [?in]): 5.08 [200]
• Contact Design: Screw Machined
• Mating Alignment: Without
• Ul Flammability Rating: UL 94V-0
• Custom Configurable: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL
• Ul Rating: Recognized
• Agency/standard Number: UL 1977
• Ul Voltage Rating (vac): 250
• Operating Temperature (°c [°f]): -40 – +105 [-40 – +221]
• Applies To: Wire/Cable
• Application Use: Wire-to-Board
• Contact Transmits (typical Application): Power
• Pick And Place Cover: Without
• Packaging Method: Bag
• Lead Free Status / RoHS Status: Compliant

Cable Receptacle
Assemblies
Product Facts
■
■
■
■
■
■
■
■
■
Technical Documents
Product Specification
108-2157
Application Specification
114-13112
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Single one-piece housing
design
Terminal Position
Assurance (TPA) Secondary
Locks on contacts help
prevent contact back-out
Pre-assembled made-to-
order cable assemblies
Installation to panel
provides float in X, Y and Z
directions
Insulation crimp on all
contacts
30 microinch (.76 micro-
meters) gold plated
contacts for high reliability
Touch-safe design passes
UL1977 and IEC 60950
finger probe test
AC and DC power in the
same connector —
meets UL & IEC safety
requirements
All MULTI-BEAM XL
products in this section are
RoHS compliant
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Power Connectors & Interconnection Systems
MULTI-BEAM XL Power Distribution Connector System
Cable Receptacle Assemblies
MULTI-BEAM XL Cable
Assemblies allow designers
freedom to connect power
supplies and power
distribution subassemblies
in a wide variety of
applications. Expanding
beyond board-to-board
applications the cable
assemblies are available for
both cable-to-board or
panel-mount applications
and can terminate 8-16
AWG and 22-26 AWG wires
all in one connector, without
using adapter circuit
boards. In addition, the
power contacts are
designed to be able to
accept two-wire terminations
which can further reduce
harness complexity by
reducing or eliminating
mid-wire splices.
For More Information
Internet http://tycoelectronics.com
Check out product information at: http://mbxl.tycoelectronics.com
Technical Support Center 1-800-522-6752
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
The use of high temperature
glass filled housing materials,
redundant contact retention
and high conductivity
contact materials allows
the use of this connector in
very high current density
applications. The features
work together to result in a
highly durable and compact
power connector, which
offers industry leading
minimum millivolt drop
through the connection. The
connector was designed to
pass the UL 1977 and IEC
60950 finger probe test
which makes the connector
touch-safe. The insulation
crimp adds further safety
by keeping the insulation
from being pulled away
from the termination point.
These features eliminate the
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
need for a secondary cable
clamp which often can be
size prohibitive.
The cable connectors
are designed to mate to
the de-facto standard
Tyco Electronics
MULTI-BEAM XL right-angle
or vertical PCB plugs. The
combination of PCB and
cable connections, both
with mixed power
and signal arrangements
provides a universal power
distribution connector
systems.
The cable assemblies are
all RoHS compliant,
designed to specific
customer requirements
and manufactured in
Tyco Electronics’ cable
assembly manufacturing
facilities.
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
19