CS5510-ASZR Cirrus Logic Inc, CS5510-ASZR Datasheet - Page 14
![no-image](/images/manufacturer_photos/0/1/141/cirrus_logic_inc_sml.jpg)
CS5510-ASZR
Manufacturer Part Number
CS5510-ASZR
Description
IC 16-Bit 8-Pin Delta Sigma ADC
Manufacturer
Cirrus Logic Inc
Datasheet
1.CS5513-BSZ.pdf
(26 pages)
Specifications of CS5510-ASZR
Number Of Bits
16
Sampling Rate (per Second)
326
Data Interface
Serial
Number Of Converters
1
Power Dissipation (max)
1.9mW
Voltage Supply Source
Dual ±
Operating Temperature
-40°C ~ 85°C
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.200", 5.30mm Width)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
ground pin, CS
the digital interface. Figures 9 and 10 illustrate the
threshold levels of the CS5510/11/12/13 serial in-
terface (CS, SCLK, and SDO).
To accommodate opto-isolators, the SCLK input is
designed with a Schmitt-trigger to allow an opto-
isolator with slower rise and fall times to directly
drive the pin. Additionally, SDO is capable of sink-
ing up to 1 mA or sourcing up to 5 mA to directly
drive an opto-isolator LED. SDO will have less than
a 600 mV loss in the drive voltage when sinking or
sourcing its current. As shown in Figure 11, the CS
signal provides the sink current path for the SDO
pin when its voltage is low (i.e. the voltage speci-
fied for SDO is relative to CS
2.4
The CS5510/12 and CS5511/13 provide distinct
modes for generating the master clock for the
ADCs. The CS5510/12 uses the SCLK input pin as
its operating clock. The CS5511/13 has an on-chip
oscillator that provides its master clock. The SCLK
pin on the CS5511/13 is used only to read data and
to put the part into sleep mode.
14
V+
V-
V+
V-
Figure 9. CS and SCLK Digital Input Levels.
Figure 10. SDO Digital Output Levels.
Clock Generator
Low
defines the logic-low level for
V
V
V
CS
OH
OL
IL
Low
V
V = 0.5 (
LOW
IH
IL
= V+ - 0.6V
= CS
= =
.).
V+
CS
LOW
- 0.45V
V+
LOW
+ 0.6V
- V-) + 0.6
V +
V-
2.4.1
The user must provide an external (CMOS com-
patible) clock to the CS5510/12. The clock is input
to SCLK where it is then divided down to provide
the master clock for the ADC. The output word rate
(OWR) for the CS5510/12 is derived from the
SCLK, and is equal to SCLK/612. Figure 12 illus-
trates an external 32.768-kHz, CMOS-compatible
clock oscillator that a user might consider.
Another clock generation option is to use a micro-
controller. Some microcontrollers have dedicated
timer/counter circuitry which can generate a clock
signal on an output pin with no software overhead.
Such a microcontroller circuit is shown in
Figure 13.
Note that the CS5510 can operate with an exter-
nal, CMOS-compatible clock at frequencies up to
130 kHz, and the CS5512 can operate with an ex-
ternal clock of up to 200 kHz with a maximum
22 ns of jitter. Linearity performance is degraded
slightly with higher clock speeds, as shown in
Figures 14 and 15. The noise performance of the
parts, however, is not affected by higher clock
speeds.
2.4.2
The CS5511/13 includes an on-chip oscillator. This
oscillator provides the master clock for the
V+
Figure 11. Serial Port Output Drive Logic.
Output Drive Logic
External Clock Source for
CS5510/12
Internal Oscillator for
CS5511/13
CS5510/11/12/13
5 mA
1 mA
SDO (from SDO
Control Logic)
CS (to CS
Control Logic)
Max Source
Max Sink
DS337F4