DSPIC33FJ16MC101-I/SO Microchip Technology, DSPIC33FJ16MC101-I/SO Datasheet - Page 149

• Manufacturer Part Number: DSPIC33FJ16MC101-I/SO
• Description: 16-bit Motor Control DSC Family, 16 MIPS, 16KB Flash, 1KB RAM 20 SOIC .300in TUB
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ16MC101-I/SO

• Processor Series: dsPIC33F
• Core: dsPIC
• Data Bus Width: 16 bit
• Program Memory Type: Flash
• Program Memory Size: 16 KB
• Interface Type: SPI, I2C, UART, JTAG
• Number Of Programmable I/os: 35
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Development Tools By Supplier: MPLAB IDE Software
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Featured Product: PIC24FJ/33FJ MCUs & dsPIC® DSCs
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 16 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 15
• Eeprom Size: -
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (0.295", 7.50mm Width)
• Lead Free Status / Rohs Status: Details

14.0
FIGURE 14-1:
© 2011 Microchip Technology Inc.
dsPIC33FJ16GP101/102 AND dsPIC33FJ16MC101/102
Note 1: This data sheet summarizes the features
2: Some registers and associated bits
OUTPUT COMPARE
of the dsPIC33FJ16GP101/102 and
dsPIC33FJ16MC101/102
devices. It is not intended to be a
comprehensive reference source. To
complement the information in this data
sheet, refer to Section 13. “Output
Compare” (DS70209) of the “dsPIC33F/
PIC24H Family Reference Manual”,
which is available from the Microchip web
site (www.microchip.com).
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization”
this data sheet for device-specific register
and bit information.
16
TMR2
OUTPUT COMPARE MODULE BLOCK DIAGRAM
Comparator
0
OCxRS
OCxR
TMR3
1
16
OCTSEL
family
Rollover
TMR2
0
Preliminary
of
in
Rollover
TMR3
1
Mode Select
OCM<2:0>
The Output Compare module can select either Timer2
or Timer3 for its time base. The module compares the
value of the timer with the value of one or two compare
registers depending on the operating mode selected.
The state of the output pin changes when the timer
value matches the compare register value. The Output
Compare module generates either a single output
pulse or a sequence of output pulses, by changing the
state of the output pin on the compare match events.
The Output Compare module can also generate
interrupts on compare match events.
The Output Compare module has multiple operating
modes:
• Active-Low One-Shot mode
• Active-High One-Shot mode
• Toggle mode
• Delayed One-Shot mode
• Continuous Pulse mode
• PWM mode without fault protection
• PWM mode with fault protection
Output
Logic
3
Set Flag bit
OCxIF
Output
Enable
R
S
Q
Enable
Output
Logic
DS70652C-page 149
OCx
OCFA