DSPIC33FJ16MC304-H/PT Microchip Technology, DSPIC33FJ16MC304-H/PT Datasheet - Page 6

• Manufacturer Part Number: DSPIC33FJ16MC304-H/PT
• Description: 16-bit DSC, 16KB Flash,40 MIPS,nanoWatt 44 TQFP 10x10x1mm TRAY
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ16MC304-H/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 9x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 140°C
• Package / Case: 44-TQFP, 44-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

19. Module: I
20. Module: I
DS80338D-page 6
When the I
slave with and address of 0x102, the I2CxRCV
register content for the lower address byte is 0x01
rather
acknowledges both address bytes.
Work around
None.
With the I
external
associated with the SCL and SDA pins do not
reflect the actual digital logic levels on the pins.
Work around
If the SDA and/or SCL pins need to be polled,
these pins should be connected to other port pins
in order to be read correctly. This issue does not
affect the operation of the I
than
2
interrupt
C module enabled, the PORT bits and
2
2
2
C
C
C module is configured as a 10-bit
0x02;
input
however,
2
C module.
functions
the
(if
module
any)
21. Module: I
22. Module: Motor Control PWM
In 10-bit Addressing mode, some address
matches don’t set the RBF flag or load the receive
register I2CxRCV, if the lower address byte
matches the reserved addresses. In particular,
these include all addresses with the form
XX0000XXXX
following exceptions:
• 001111000X
• 011111001X
• 101111010X
• 111111011X
Work around
Ensure that the lower address byte in 10-bit
Addressing mode does not match any 7-bit
reserved addresses.
When the device is operated in DOZE mode and
the Motor Control PWM module has a postscaler
set to any value different than 1:1 (PTOPS > 0 in
PxTCON register), the Motor Control PWM
module generates more interrupts than expected.
Work around
Do not use DOZE mode with the Motor Control
PWM if the time base output postscaler is different
than 1:1 (PTOPS > 0 in PxTCON register).
2
C
and
© 2008 Microchip Technology Inc.
XX1111XXXX,
with
the