KSZ8842-PMQL Micrel Inc, KSZ8842-PMQL Datasheet - Page 74
![2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI Bus Interface( )](/photos/6/81/68152/576-128-pqfp_sml.jpg)
KSZ8842-PMQL
Manufacturer Part Number
KSZ8842-PMQL
Description
2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI Bus Interface( )
Manufacturer
Micrel Inc
Specifications of KSZ8842-PMQL
Controller Type
Ethernet Switch Controller
Interface
PCI
Voltage - Supply
3.1 V ~ 3.5 V
Operating Temperature
0°C ~ 70°C
Mounting Type
Surface Mount
Package / Case
128-MQFP, 128-PQFP
Number Of Primary Switch Ports
2
Internal Memory Buffer Size
32
Operating Supply Voltage (typ)
3.3V
Fiber Support
Yes
Integrated Led Drivers
Yes
Phy/transceiver Interface
MII
Power Supply Type
Analog/Digital
Package Type
PQFP
Data Rate (typ)
10/100Mbps
Vlan Support
Yes
Operating Temperature (max)
70C
Operating Temperature (min)
0C
Pin Count
128
Mounting
Surface Mount
Jtag Support
No
Operating Supply Voltage (max)
3.5V
Operating Supply Voltage (min)
3.1V
Operating Temperature Classification
Commercial
Data Rate
100Mbps
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
576-1636 - BOARD EVALUATION KSZ8842-PMQL
Current - Supply
-
Lead Free Status / RoHS Status
Compliant, Lead free / RoHS Compliant
Other names
576-1513-5
KSZ8842-PMQL
KSZ8842-PMQL
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
KSZ8842-PMQLI
Manufacturer:
TI
Quantity:
3 100
Micrel, Inc.
Port 1 Control Register 1 (Offset 0x0500): P1CR1
This register contains the global per port control for the switch port 1 function.
October 2007
15 – 8
Bit
4:3
7
6
5
2
1
0
Default
0x00
0
0
0
0
0
0
0
R/W
RW
RW
RW
RW
RW
RW
RW
RO
Description
Reserved
Broadcast storm protection enable
1 = enable broadcast storm protection for ingress packets on the port
0 = disable broadcast storm protection
Diffserv priority classification enable
1 = enable diffserv priority classification for ingress packets on port
0 = disable diffserv function
802.1p priority classification enable
1 = enable 802.1p priority classification for ingress packets on port
0 = disable 802.1p
Port based priority classification
00 = ingress packets on port 1 will be classified as priority 0 queue if
“Diffserv” or “802.1p” classification is not enabled or fails to classify.
01 = ingress packets on port 1 will be classified as priority 1 queue if
“Diffserv” or “802.1p” classification is not enabled or fails to classify.
10 = ingress packets on port 1 will be classified as priority 2 queue if
“Diffserv” or “802.1p” classification is not enabled or fails to classify.
11 = ingress packets on port 1 will be classified as priority 3 queue if
“Diffserv” or “802.1p” classification is not enabled or fails to classify.
Note: “Diffserv”, “802.1p” and port priority can be enabled at the same
time. The OR’ed result of 802.1p and DSCP overwrites the port priority.
Tag insertion
1 = when packets are output on the port, the switch will add 802.1p/q tags
to packets without 802.1p/q tags when received. The switch will not add
tags to packets already tagged. The tag inserted is the ingress port’s
“port VID”.
0 = disable tag insertion
Tag removal
1 = when packets are output on the port, the switch will remove 802.1p/q
tags from packets with 802.1p/q tags when received. The switch will not
modify packets received without tags.
0 = disable tag removal
TX Multiple Queues Select Enable
1 = the port output queue is split into four priority queues.
0 = single output queue on the port. There is no priority differentiation
even though packets are classified into high or low priority.
74
KSZ8842-PMQL/PMBL
M9999-100207-1.5