MTCMR-C1-GP-N2 Multi-Tech Systems, MTCMR-C1-GP-N2 Datasheet - Page 30

• Manufacturer Part Number: MTCMR-C1-GP-N2
• Description: MODEM CELLULAR DUAL CDMA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-C1-GP-N2

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz, 1575.42MHz
• Applications: Sprint Networks (USA)
• Interface: RS-232, USB
• Sensitivity: -161dB
• Data Rate - Maximum: 153.6kbps
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1096

Chapter 4 – Using the Web Management Software
Daylight Saving End Time
Submit Button
I P Setup > Static Routes
8 2 B
Add Static Routes
IP packets destined for the network indicated in the drop down box are routed to the IP address in the box pointed to by the
arrow. The networks in the drop down box can be defined under the ‘Networks & Services’ tab.
I P Setup > Remote Configuration
8 3 B
Remote Configuration
30
Routing information is used by every computer connected to a network to identify whether it is sending a data packet directly
to the firewall or passing it on to another network. The options to Delete or Edit a route after it has been defined and added
are available by using the table at the bottom of the screen.
End Ordinal:
End Month:
End Day:
End Time:
Click the Submit button to save these settings.
Note:
changes.
Static Route:
Add Button:
Important Note:
Add Network/Host for Remote Configuration:
Select a network or host from the drop down box. You can define more networks or hosts under the Network & Services
tab. The choices are Any, LAN, and WAN Interface. Choose all that apply. Click the Add button after each selection.
Add Button:
Delete:
You must click Save and Restart once you have completed and submitted all the screens on which you have made
You will have the option to delete Any and WAN Interface in the Options window once it is added. Click on
Delete in the Options window.
After clicking the Add button, the new route is added and will display at the bottom of the screen.
Set the end ordinal to use during Daylight Saving mode. Select the week in which daylight saving time ends.
Options are first/second/third/fourth/last. Default is first.
Set the end month to use during Daylight Saving mode. Default is November.
Set the end weekday to use during Daylight Saving mode. Default is Sunday.
Set the end time to use during Daylight Saving mode. Default is 02:00 (hh:mm).
Select a static route from the drop down list box, and then click the Add button.
After clicking the Add button, the network or host is added and displays at the bottom of the screen.
The Static Route screen will not display until the network is defined under Networks & Services.
Multi-Tech Systems, Inc. MultiModem rCell User Guide