MTCMR-C1-GP-N2 Multi-Tech Systems, MTCMR-C1-GP-N2 Datasheet - Page 57

• Manufacturer Part Number: MTCMR-C1-GP-N2
• Description: MODEM CELLULAR DUAL CDMA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® iCellr

Specifications of MTCMR-C1-GP-N2

• Function: Transceiver, CDMA, Modem
• Modulation Or Protocol: CDMA2000
• Frequency: 800MHz, 1.9GHz, 1575.42MHz
• Applications: Sprint Networks (USA)
• Interface: RS-232, USB
• Sensitivity: -161dB
• Data Rate - Maximum: 153.6kbps
• Voltage - Supply: 9 V ~ 32 V, USB
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1096

Serial Port > Server Settings
This feature enables a TCP/UDP client on the Ethernet network to connect to the remote serial terminal connected to the DE9,
RS232 port on the router. The router acts as a TCP/UDP server which allows two way traffic between the TCP/UDP client and
the remote terminal on the serial port.
The initial connection setup for the TCP/UDP server is as shown below.
Multi-Tech Systems, Inc. MultiModem rCell User Guide
T CP/UDP – Server Configuration
1 1 6 B
S ubmit Button
1 0 8 B 1 3 6 B
Configures TCP/UDP Server through which the serial terminal connected to the RS-232 connector, DE9 on the back of
the unit listens for the remote TCP/UDP client to communicate on the LAN/WAN.
S tatus:
1 0 6 B
S erver Type:
1 0 7 B
Port:
Connection Terminate By:
Escape Sequence:
Inactivity timeout:
Others:
Click the Submit button to save these settings.
TCP/UDP
Client
LAN / WAN
Sets the client status to either Enable or Disable. The default is Disable
Sets the client to either TCP or UDP. The default is TCP.
Sets the server port. The default is None
Set the escape sequence characters at which the connection should terminate.
Set the inactivity timeout at which the connection should terminate.
The other terminating sequences are: DTR-toggle or Always-On.
DTR-toggle:
Always-On:
Sets the connection terminate sequence as follows:
Sets the terminate sequence as Always-on.
If DTR status goes low, the connection terminates.
Router hardware
TCP/UDP
Server
Chapter 4 – Using the Web Management Software
Connector
DE9
HyperTerminal /
Minicom
Device
Serial
57