MTCBA-H4-EN2-P2-NAM Multi-Tech Systems, MTCBA-H4-EN2-P2-NAM Datasheet - Page 78

• Manufacturer Part Number: MTCBA-H4-EN2-P2-NAM
• Description: ROUTER WIRELESS QUAD HSPA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® rCellr

Specifications of MTCBA-H4-EN2-P2-NAM

• Function: Transceiver, HSPA, Router
• Modulation Or Protocol: GPRS, GSM, EDGE
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz
• Applications: AT&T Networks (USA)
• Interface: RJ-45, RS-232
• Features: US Power Cord
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1095

+CSCB Select Cell Broadcast Message Indication
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A)
Description:
Parameter Descriptions:
Syntax:
Note:
Test Command:
Test Response:
Read Command:
Read Response:
Write Command:
Write Response:
<operation>
<mids>
<dcss>
1
Add/delete operation
0
Cell Broadcast Message ID specification
All different possible combinations of CBM message identifiers; e.g., “0,1,5,320-478,922”).
All different possible combinations of CBM data coding schemes (e.g., "0-3,5"). If default empty string
is used, all CBMs are received independent of their dcss.
A given <dcss> replaces any former value and is used for consecutive requests.
The <operation> parameter shown in the AT+CSCB read command response retains the value last
used in the Write command. This way, the read command response always reflects the last action
done: 0 means that the last action was adding new channel(s), 1 means that the last action was
deleting channel(s).
The test command returns the supported <operation>s as a compound value.
The read command displays the accepted message types. Depending on the
<operation> parameter, the write command adds or deletes the message types
accepted by the ME.
Default. Add new message types defined in <mids> to the list of accepted message
Delete message types defined in <mids> from the list of accepted message types by ME
and replace types defined in <dcss>. In case of using this operation code without
parameters all <mids>s and <dcss>s will be deleted. (For more, see notes.)
types by ME and replace types defined in <dcss>. In case of using this operation code
without parameters default (0-65535) range will be added to the list of <mids>.
AT+CSCB=?
AT+CSCB?
+CSCB: (list of supported <operation>s)
OK
ERROR
+CMS ERROR: <err>
+CSCB: <operation>, <mids>, <dcss>
OK
ERROR
+CMS ERROR: <err>
AT+CSCB=[<operation>[, <mids>[, <dcss>]]]
OK
ERROR
+CMS ERROR: <err>
Chapter 3 – Supported GSM/WCDMA AT Commands
78