BAS21HT1G ON Semiconductor, BAS21HT1G Datasheet - Page 2

• Manufacturer Part Number: BAS21HT1G
• Description: DIODE SWITCH 200MA 250V SOD323
• Manufacturer: ON Semiconductor

Specifications of BAS21HT1G

• Voltage - Forward (vf) (max) @ If: 1.25V @ 200mA
• Voltage - Dc Reverse (vr) (max): 250V
• Current - Average Rectified (io): 200mA (DC)
• Current - Reverse Leakage @ Vr: 100nA @ 200V
• Diode Type: Standard
• Speed: Small Signal =< 200mA (Io), Any Speed
• Reverse Recovery Time (trr): 50ns
• Capacitance @ Vr, F: 5pF @ 0V, 1MHz
• Mounting Type: Surface Mount
• Package / Case: SC-76, SOD-323, UMD2
• Product: Switching Diodes
• Peak Reverse Voltage: 250 V
• Forward Continuous Current: 0.2 A
• Configuration: Single
• Recovery Time: 50 ns
• Forward Voltage Drop: 1.25 V
• Maximum Reverse Leakage Current: 0.1 uA
• Operating Temperature Range: - 55 C to + 150 C
• Maximum Operating Temperature: + 150 C
• Minimum Operating Temperature: - 55 C
• Mounting Style: SMD/SMT
• Rectifier Type: Small Signal Switching Diode
• Peak Rep Rev Volt: 250V
• Avg. Forward Curr (max): 0.2A
• Rev Curr: 0.1uA
• Forward Voltage: 1.25V
• Operating Temp Range: -55C to 150C
• Package Type: SOD-323
• Rev Recov Time: 50ns
• Operating Temperature Classification: Military
• Mounting: Surface Mount
• Pin Count: 2
• Forward Current If(av): 200mA
• Repetitive Reverse Voltage Vrrm Max: 250V
• Forward Voltage Vf Max: 1V
• Reverse Recovery Time Trr Max: 50ns
• Forward Surge Current Ifsm Max: 625mA
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: BAS21HT1GOSTR

© Semiconductor Components Industries, LLC, 2007
March, 2007 − Rev. 02H
ON Semiconductor and
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ISSUE
C
D
E
G
H
F
CHANGED OF OWNERSHIP FROM MOTOROLA TO ON SEMICONDUCTOR.
ADDED SOD−323 IN USED ON SECTION. REQ. BY D. TRUHITTE.
ADDED DIM L. ADDED NOTES 4 AND 5. REQ. BY M. DEWITT.
CORRECTED TITLE. REQ. BY M. DEWITT.
ADDED NOM VALUES AND CHANGED DIMS TO INDUSTRY STANDARD. REQ.
BY D. TRUHITTE.
CORRECTED ISSUE LETTER. REQ. BY J. LESLIE.
CREATED CATHODE AND NON−CATHODE BAND OPTIONS.
REQ. BY J. DAUGHERTY.
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
REVISION
DOCUMENT NUMBER:
98ASB17533C
PAGE 2 OF 2
Case Outline Number:
13 MAR 2007
30 APR 2002
05 JAN 2004
31 JAN 2005
10 FEB 2005
12 JUL 2004
DATE
477