NS5-MQ10-V2 Omron, NS5-MQ10-V2 Datasheet - Page 209

• Manufacturer Part Number: NS5-MQ10-V2
• Description: 5 Mono Tchsrn, Serial+USB, Iv
• Manufacturer: Omron

Specifications of NS5-MQ10-V2

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6-4-7
6-4-8
6-4-9
Operation Log Recording Method
Error Log Recording Method
System Memory
new data is recorded.
Use the CX-Designer to set the number of log entries.
Reference
This function displays the method for recording the operation log. The operation log re-
cording method is read only and cannot be edited. This operation log recording method is set
from the CX-Designer.
If Save in Ring Buffer Format is set, when the specified number of items is exceeded, the
oldest data is deleted and the new data is recorded.
If the log is not saved in ring buffer format, the PT stops collecting log data when the speci-
fied number of items has been reached. Initialize the operation log to reopen the record.
Reference
This function displays the error log recording method. The error log recording method is read
only and cannot be edited. The use of a ring buffer for the error log recording method is fixed.
When the maximum number of items is exceeded, the oldest data is deleted and the new
data is recorded.
Reference
The system memory is used to control the PT and exchange information between the host
and the PT, such as notifying the host of PT status. The system memory can be allocated to
host addresses or to PT memory.
Allocating the system memory as host addresses allows operations such as controlling the
PT from the host. The allocated location in the host is displayed in the System Memory and
cannot be edited.
The location where the system bit memory and system word memory is allocated (allocated
host and address) is displayed in the System Bit Memory ($SB) and System Word Memory
($SW).
Reference
If the system memory has been set to NT compatibility, allocations for the Control Area, Noti-
fication Area, and Window Control Area will be displayed.
Refer to 6-2-3 Initializing and Saving Data Log in this manual and Data Log Function in
2-20 Special Functions in the Programming Manual for details on the data log.
Refer to 6-2-4 Initializing and Saving the Operation Log in this manual and Operation
Log Function in 2-20 Special Functions in the Programming Manual for details on the
operation log.
Refer to 6-2-5 Initializing and Saving the Error Log in this manual and Error Log Function
in 2-20 Special Functions in the Programming Manual for details on the error log.
Refer to 2-4 System Memory in the PT Programming Manual for details on the system
memory.
6-4 Project Settings
6-35