DRT2-MD16S Omron, DRT2-MD16S Datasheet - Page 386

• Manufacturer Part Number: DRT2-MD16S
• Description: DRT2 Mix IO E-Con8 In/out, NPN
• Manufacturer: Omron

Specifications of DRT2-MD16S

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

I/O Data Allocated in the Master
Setting Using the DeviceNet Configurator
Analog Output Terminals
1,2,3...
■ Allocating Only Analog Output Values (Default I/O Data)
■ Allocating Selected I/O Data
■ Allocating User-defined I/O Data
When using the Analog Output Terminal’s default settings, only the analog
output values are allocated as I/O in the two words (four bytes) of the Master’s
OUT Area. The Configurator can also be used to allocate the I/O data in a
user-defined address (user allocation).
Analog data that has been processed using math operations and Status Flags
(input) can be allocated in the Master. The Configurator can be used to select
the data from a pull-down menu, as shown in the following procedure.
1. Double-click the icon of the Slave to be set in the Main Window and open
2. Click the General Tab, and select Analog Data from the pull-down menu
3. Click the Download Button, and then click the Reset Button to reset the
4. Click the OK Button and exit the window.
Analog data that has been processed using math operations and Status Flags
can be selected and allocated as I/O in the Master in any combination. The
Configurator can be used to allocate the I/O in the Master.
This method is supported by CS/CJ-series DeviceNet Master Units only.
15
the Edit Device Parameters Window. (From the Maintenance Mode Win-
dow, click the right mouse button over the Slave icon and select Parame-
ters and Edit.)
in the Default Connection Path (Out) field. To allocate the Status Flags at
the same time, select Generic Status from the pull-down menu in the De-
fault Connection Path (In) field.
Unit.
Analog output value for Output 0
Analog output value for Output 1
8
7
Section 7-5
0
365