NSH5-232UL-3M Omron, NSH5-232UL-3M Datasheet - Page 63

• Manufacturer Part Number: NSH5-232UL-3M
• Description: 3m RS232 Cable For NSH5
• Manufacturer: Omron

Specifications of NSH5-232UL-3M

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Transferring System
Program Data
3-5-4
Memory Cards
Transferring Data with Memory Cards
1,2,3...
Note
Note
1. Copy all of the files and folders in the RecoverUpdate_@_@ folder inside
2. Insert the Memory Card into the PT and turn ON the power supply. The re-
3. The indicator will flash green when the download has been completed nor-
The System Program is stored under the CX-Designer's install folder (default
location is C:\Program Files\Omron\CX-One\CX-Designer) in folders that are
created for each type and version, as follows:
\SystemBackup\NSH5\V@_@\bank1: NSH5 system program
(“@_@” will be replaced by numbers indicating the system program version.
For example “RecoverUpdate_7_0” is the file for version 7.0.)
To replace a system program, use Windows Explorer or another method to
copy each of the folders for the required system program under \bank1 to the
route directory of the Memory Card.
For details on methods for transferring data from the Memory Card to the PT,
refer to 3-5-4 Transferring Data with Memory Cards.
The system backup folder can be created only if CX-Designer is installed from
the stand-alone CD-ROM. If the CX-Designer is installed from CX-One, rein-
stall the system program by following the procedure for using a recovery/
update program described above.
Using a Memory Card with the PT allows system programs (programs
required for operating the PT, such as programs for communications and
fonts) and screen data to be transferred to and from the PT.
There are several types of data transfers, including manual transfers (in which
the data to be transferred and the direction of transfer are selected manually),
downloads (in which data is transferred automatically from the Memory Card
to the PT), uploads (in which data is transferred automatically from the PT to
the Memory Card), and bank specifications (four banks max.). The transfer
method is specified using the System Menu.
(1) For details on the recovery/update program, select Start - Program -
(2) Refer to information on the procedure for recovery and update and to the
(1) Before transferring data, check to be sure that the system programs and
(2) Do not perform the following operations while accessing the Memory
the CX-Designer installation folder (default: C:\ProgramFiles\Omron\CX-
One\CX-Designer) to a Memory Card. This program can be selected when
installing the CX-Designer.
(“@_@” will be replaced by numbers indicating the system program ver-
sion. For example “RecoverUpdate_7_0” is the file for version 7.0.)
covery/update program will start automatically.
mally.
OMRON - CX-One - CX-Designer - How to recover the system prog
Ver. 7.0.
Setup Manual for troubleshooting information if an error is displayed
when you use the recovery/update program.
screen data types match those in the PT.
Card. The data may be damaged and the Memory Card may need to be
formatted.
• Turning OFF the power to the PT.
• Removing the Memory Card.
Section 3-5
41