Z-15GD55-MD Omron, Z-15GD55-MD Datasheet - Page 16

• Manufacturer Part Number: Z-15GD55-MD
• Description: BASIC SWITCH
• Manufacturer: Omron
• Series: Zr

Specifications of Z-15GD55-MD

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 15A @ 125VAC
• Actuator Type: Round (Pin Plunger)
• Mounting Type: Chassis Mount
• Termination Style: Cable Leads
• Operating Force: 540gf
• Pole Throw Configuration: SPDT
• Switch Function Configuration: N.O./N.C.
• Actuator Style: Short Spring Plunger
• Actuator Material: Stainless Steel
• Current Rating (max): 15A
• Ac Voltage Rating (max): 500VVAC
• Dc Voltage Rating (max): 250VVDC
• Mechanical Life: 10000000
• Terminal Type: Wire Lead
• Product Depth (mm): 17.45mm
• Product Length (mm): 49.2mm
• Operating Temp Range: -15C to 80C
• Contact Form: SPDT
• Contact Rating: 15 Amps at 250 Volts
• Actuator: Plunger
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Z15GD55MD; Z15GD55MDNC

■ Molded Terminal Type Ordering
The solder terminal type can be supplied with molded terminals with
a choice of five different lead outlet directions.When placing your
order for the molded terminal type, add the following code to the
model number.
Note: 1. Standard leads are single-core vinyl cords (VSF) with a
■ Lead Wire Specifications
16
Note: 1. Operation is possible in any direction other than the axial direction (indicated by the arrow ↓ ).
-M@@
Flexible Rod (Steel Wire)
Z-15HNJS55-B
VSF (single-core, vinyl cord) 1.25
VCT (vinyl-insulated cable)
Information
Mold thickness
(No symbol)…a = 12 mm
with VSF
19…a = 19 mm with VCT
2. Standard vinyl cord lengths are 1 m,3 m, and 5 m.
3. Mold thickness will be 19 mm when using VCT cords.
4. Standard unit has three lead outlets in the same direction.
5. Connect the black lead to the COM terminal, white lead to
2. Use only the area within the top 30 mm of the rod as the operating part. (Do not use the area that falls within 100 mm from the mounting
3. The steel wire can be replaced if damaged. (Model: Lever for HNJS55)
nominal cross sectional area of 1.25 mm
the NO terminal, and red lead to the NC terminal, respec-
tively.
hole as the operating part. Using this area may cause damage to the steel wire.)
Lead outlet directions
(L, R, D, F, H)
Type
Snap Action Switch
Nominal cross-sectional
area (mm
Z
2
)
2
.
Approx. 3.1
Approx.9.6 (2-core)
Approx.10.5 (3-core)
Finished outer diameter
(mm)
■ Directions of Lead Outlets
The following diagrams show the molded terminal version of sealed
type Z-15GW2255,with a mold thickness of 12 mm.
Note: Respective directions of lead outlets are determined with the
plunger viewed on your left.
Black-COM
White-NO
Red-NC
Connection to terminal
OF max.
PT max.
0.15 N {15 gf}
(25 mm)
0.5,1,2,3,5
(standard)
Length (m)