Z-15GD55-MD Omron, Z-15GD55-MD Datasheet - Page 8

• Manufacturer Part Number: Z-15GD55-MD
• Description: BASIC SWITCH
• Manufacturer: Omron
• Series: Zr

Specifications of Z-15GD55-MD

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 15A @ 125VAC
• Actuator Type: Round (Pin Plunger)
• Mounting Type: Chassis Mount
• Termination Style: Cable Leads
• Operating Force: 540gf
• Pole Throw Configuration: SPDT
• Switch Function Configuration: N.O./N.C.
• Actuator Style: Short Spring Plunger
• Actuator Material: Stainless Steel
• Current Rating (max): 15A
• Ac Voltage Rating (max): 500VVAC
• Dc Voltage Rating (max): 250VVDC
• Mechanical Life: 10000000
• Terminal Type: Wire Lead
• Product Depth (mm): 17.45mm
• Product Length (mm): 49.2mm
• Operating Temp Range: -15C to 80C
• Contact Form: SPDT
• Contact Rating: 15 Amps at 250 Volts
• Actuator: Plunger
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Z15GD55MD; Z15GD55MDNC

Note: 1. Do not use the M12 mounting screw and the case mounting hole at the same time, or excessive pulling force will be imposed on the
8
Panel Mount Plunger
Z-15GQ-B, Z-01HQ-B,
Z-15HQ-B, Z-15EQ-B
Z-15GQ3-B
Z-15GQ8-B
OF
RF min
PT max.
OT min.
MD max.
OP
2. On the model Z-15GQ3-B, PT can be set to a value larger than that for the Z-15GQ.
3. On the model Z-15GQ8-B, operating position can be adjusted by providing a screw in the plunger section. The M3 hole with a depth of
Switch and the case and cover may be damaged.
10 mm is a through hole. Take precautions so that no water or screw lock agent penetrates into the hole.
Snap Action Switch
Z-15GQ-B
2.45 to 3.43 N
{250 to 350 gf}
1.12 N {114 gf}
0.4 mm
5.5 mm
0.05 mm
21.8 ± 0.8 mm
Z-15HQ-B
1.96 to 2.79 N
{200 to 285 gf}
1.12 N {114 gf}
0.3 mm
5.5 mm
0.025 mm
Z
Z-15EQ-B
6.13 to 7.85 N
{625 to 800 gf}
1.12 N {114 gf}
0.8 mm
5.5 mm
0.13 mm
Z-01HQ-B
2.45 N {250 gf} max. 2.45 to 3.43 N
0.78 N {80 gf}
0 5 mm
5.5 mm
0.05 mm
Note: 1. Stainless-steel plunger
Note: 1. Stainless-steel plunger
Note: 1. Stainless-steel plunger
Z-15GQ3-B
{250 to 350 gf}
1.12 N {114 gf}
4.2 mm
2.5 mm
2.2 mm
18.8 ± 0.8 mm
2. Imperfect screw part with a maximum
2. Imperfect screw part with a maximum
2. Imperfect screw part with a maximum
length of 1.5 mm.
length of 1.5 mm.
length of 1.5 mm.
Z-15GQ8-B
2.45 to 3.43 N
{250 to 350 gf}
1.12 N {114 gf}
0.5 mm
5.5 mm
0.05 mm
32.5 ± 1 mm