M4SSER OPTO 22, M4SSER Datasheet - Page 2

Computers, Serial Interface Cards

M4SSER

Manufacturer Part Number
M4SSER
Description
Computers, Serial Interface Cards
Manufacturer
OPTO 22
Datasheet

Specifications of M4SSER

Peak Reflow Compatible (260 C)
No
Leaded Process Compatible
No
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
DATA SHEET
Form 664-070104
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Phone: (951) 695-3000 • (800) 321-OPTO • Fax: (951) 695-3095 • www.opto22.com
Specifications
LED SPECIFICATIONS
M4SSER GENERAL SPECIFICATIONS
Inside Sales: (800) 321-OPTO • Product Support: (800) TEK-OPTO • (951) 695-3080 • Fax: (951) 695-3017 • E-mail: sales@opto22.com
RX2 (COM2 receive)
IRQ2 (COM2 interrupt)
RX3 (COM3 receive)
IRQ3 (COM2 interrupt)
Communication speed
Maximum connection distance
Port configuration:
COM2, RS-232 or RS-485/422
COM3, RS-232 or RS-485/422
Cable specifications for RS-232
or RS-485/422
Connector:
Manufacturer
Power requirement (at 5 VDC)
Storage temperature
TX2 (COM2 transmit)
TX3 (COM3 transmit)
Typical operating temperature
LED
Item
issued by the serial device.
issued by the serial device.
This indicator illuminates whenever Com2 is transmitting
serial data. If the LED fails to illuminate, it could indicate
that the port is idle or a wiring problem exists.
This indicator illuminates whenever COM2 is receiving
serial data. If the LED fails to illuminate, it could indicate
that the port is idle or a wiring problem exists.
This indicator illuminates when a hardware interrupt is
This indicator illuminates whenever COM3 is transmitting
serial data. If the LED fails to illuminate, it could indicate
that the port is idle or a wiring problem exists.
This indicator illuminates whenever COM3 is receiving
serial data. If the LED fails to illuminate, it could indicate
that the port is idle or a wiring problem exists.
This indicator illumates when a hardware interrupt is
100-ohm nominal impedance, 12.5 p/F/ft.
300-115.2 KBd
Up to 3,000 ft. (more with repeater)
RS-232: TX, RX, RTS, CTS, DTR (+V), +5V, GND
RS-485: 2-wire, half-duplex; RS-422: 4-wire, half- or full-duplex
#24 gauge, 7x32 stranded,
Plug, 7-position screw terminal
Phoenix Contact, P/N: MC1 5/7-ST-3, 81
220 mA
-20° C to 70° C
-40° C to 85° C
Indication
Specification
INTERFACES
CONTROLLER
MODULAR
page 2/7

Related parts for M4SSER