72-8170 TENMA, 72-8170 Datasheet
![MULTIMETER, ANALOG, 6 FUNCTIONS](/photos/27/66/276618/4316467_sml.jpg)
72-8170
Specifications of 72-8170
72-8170 Summary of contents
Page 1
... Model 72-8170 Analog Volt/Ohm Meter INSTRUCTION MANUAL Tenma Test Equipment www.tenma.com ...
Page 2
Controls and Functions Specifications Function Measurement Ranges 0.6V, 3.0V, 12V, 60V and 300V DCV 1000V 12V, 30V, 120V, 300V ACV 1000V 120µA, 3mA, 30mA, 300mA DCA 10A Ohms x1Ω, x100Ω, x1KΩ, x10KΩ Continuity Beeps below 100Ω 1.5V @ 300mA Battery ...
Page 3
Tips for Use • This manual should be read thoroughly before use and kept for future reference. • Make certain that the red lead is connected to the (+) input terminal, and the black lead is connected to the (–) ...
Page 4
Read the value on the topmost DC scale. Note that full 10A measurement will register as “10” on this scale, and not provide a full scale reading. • Important Note: ...
Page 5
Add dB 0 Battery test • Connect the red lead to the (+) VΩA input. • Connect the black lead to the (–) COM input. • Select the proper range for the type of battery to be used. • For ...
Page 6
... Replace with only a comparable 5mm x 20mm 0.5A 250V fast blow type fuse. • Replace the rear housing and reinstall the screws. • Important Note: Replacement of the fuses is seldom required. A blown fuse is always a direct result from improper meter use. Tenma Test Equipment 405 S. Pioneer Blvd. Springboro, Ohio 45066 www.tenma.com ...