M250A GOSSEN METRAWATT, M250A Datasheet - Page 6

• Manufacturer Part Number: M250A
• Description: MULTIMETER METRAHIT E-XTRA
• Manufacturer: GOSSEN METRAWATT

Specifications of M250A

• Dmm Type: Handheld
• Voltage Measuring Range Dc: 1000V
• Voltage Measuring Range Ac: 1000V
• Current Range Dc: 600µA To 10A
• Current Range Ac: 600µA To 10A
• Resistance Measuring Range: 600R - 60MR
• Frequency: RoHS Compliant
• Frequency Measuring Range: 600Hz - 1MHz
• Capacitance Measuring Range: 60nF -
• Rohs Compliant: NA

METRAHIT⏐E
TRMS Digital Multimeters
Accessories for Operation at a PC
Interface Adapter for USB Connection
The following functions can be executed with the USB X-TRA
bidirectional interface adapter:
•
•
•
The adapter does not require a separate power supply.
Its baud rate is 38,400 baud.
A CD ROM is included which contains current drivers for
Windows operating systems.
6
Configure the METRAHIT Multimeter from a PC.
Transmit live measurement data to the PC.
Read out data from memory at the METRAHIT E
XTRA
⏐E
TECH
XTRA
⏐E
.
SPECIAL
METRAwin
METRAwin
ment data logging program for recording, visualizing and documen-
ting measured values of multimeters of the METRAHIT e-series.
Communication between the PC and the measuring instrument(s)
is established via available interface adapters.
Depending upon device type, one or several of the following ope-
rating modes are possible:
•
•
* Depending upon device type, measuring function, number of measuring channels
•
For purposes of analysis, data recorded online or read in from the
device’s memory can be displayed in various formats:
System Requirements
METRAwin 10 (version 5.x) can be run on IBM compatible PCs with
Microsoft Windows® 95, 98, ME, NT 4.0, 2000 oder XP.
Multimeter-display
for up to 4 channels
Y(t)-recorder display
for up to 6 channels
⏐E
and communication (e.g. via modem), sample intervals of less than 1 s cannot be
used.
Device Configuration
Remote configuration and querying of device-specific functions
and parameters, for example measuring function, measuring
range and memory parameters. Frequently used device settings
can be saved to configuration files for easy recall.
Online Recording of Measurement Data
Read-in, display and recording of momentarily measured data
from the interconnected device.
– Number of
– Start recording
– Recording mode
– Recording duration max. 10 million intervals
Reading Out and Visualizing Stored Data
If supported by the device: read-in and display of offline data
recorded to device memory.
measuring channels up to10
BASE
®
10/METRAHit
®
10/METRAHit
®
PC software is a multilingual, measure-
manual, triggered by measured value, time
triggered
> time controlled
> manually controlled
> measured value controlled in event
with sampling interval of 0.05 s* ... 1 s ...
60 min
of exceeded limit/delta value
®
Software
Tabular display
for up to 10 channels
XY-recorder display
for up to 4 channels
GMC-I Gossen-Metrawatt GmbH