CL1F3201UK Souriau Connection Technology, CL1F3201UK Datasheet - Page 3

• Manufacturer Part Number: CL1F3201UK
• Description: PLUG, FREE, SOCKET, FAB KIT, 31WAY
• Manufacturer: Souriau Connection Technology
• Series: Clipperr

Specifications of CL1F3201UK

• Connector Body Material: Thermoplastic
• Gender: Plug
• Connector Mounting: Cable Mount
• Connector Shell Size: 3
• Insert Arrangement: 3-31
• Connector Type: Circular Industrial

Description
Retention plate principle
Features
Mechanical
• Monobloc shell and insulator in
• 180° screw coupling with positive
• Scoop proof.
• Copper alloy contacts, machined
• Mechanical endurance :
• Retention force :
• Vibration :
• plating : gold on active
- connector : 250 cycles
- retention plate : 50 cycles
- # 20
- # 16
- frequency range :
- 10 cycles in accordance with
thermoplastic material self-
extinguishing to UL 94 V0.
audible safety latch.
or stamped and formed
10-2000 Hz, 20 g
mating / unmating,
mating / unmating.
CEI 68-2-6
part over nickel.
Locked, the retention plate holds the contacts firmly in position
Unlocked, the retention plate allows
70 N
90 N.
the insertion/extraction of contacts without tooling
CLIPPER
Electrical
• Withstand voltage : 1500 Vrms
• Contact resistance < 10 m .
• Current rating per contact :
Environmental
• Sealing :
• Working temperature :
• Resistance to salt spray :
• Resistance to fluids :
- machined contacts :
- stamped and formed contacts :
- up to IP68
- 48 h min
-
- oil,
- petrol, fuel,
- lubricants
- other fluids : consult FCI.
min or in accordance with
DIN 57110b.
-40°C to +125°C. (-40°F to +257°F)
# 20 (7 Amps), # 16 (13 Amps)
# 20 (5 Amps), # 16 (10 Amps).
connectors).
1000 h (sealed mated
Unlocked
Locked
plate
plate
Presentation
CLIPPER is a plastic low cost
range of industrial connectors,
UL & CSA approved.
Complementing FCI product range
CLIPPER offers :
• a high sealing level :
• a retention plate system allowing
• facilities to use trade backshells
CLIPPER range is composed of :
• 4 sizes of shell in molded black
• 7 contact layouts
• #20, #16 contacts, machined or
• An adaptor with electrical PG
• Backnut with grommet facilities.
insertion/extraction
contacts without the need for
tooling,
with the electrical thread adaptor
(PG).
thermoplastic material
(size 1/2/3/4).
(4/9/14/18/26/31/40 contacts).
stamped and formed, crimp,
solder or PC tail termination.
thread for PG backshells.
- IP67 for the sealed plug (with
- IP68 for the enhanced sealed
This version allows a permanent
waterproof level when immersed
at depths down to 30 meters.
o’ring and mating seal)
plug (with o’ring and a special
mating seal).
of
the
3