1423155-5 Tyco Electronics, 1423155-5 Datasheet - Page 2

• Manufacturer Part Number: 1423155-5
• Description: Electromechanical Relay SPDT 10A 125VDC Socket
• Manufacturer: Tyco Electronics
• Type: Control Relayr
• Series: GP, AGASTATr

Specifications of 1423155-5

• Contact Arrangement: SPDT
• Dc Coil Voltage: 125 V
• Mounting: Socket
• Relay Type: General Purpose
• Contact Form: SPDT (1 Form C)
• Contact Rating (current): 10A
• Switching Voltage: 220VAC
• Coil Type: Standard
• Coil Voltage: 125VDC
• Mounting Type: Socket
• Termination Style: Socketable
• Circuit: SPDT (1 Form C)
• Contact Rating @ Voltage: 10A @ 220VAC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Coil Current: -
• Control On Voltage (max): -
• Control Off Voltage (min): -
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: GPD

Specifications subject to change
Dimensions are for reference only.
Control Relays – Series GP Power Relays
File No.
E15631
File No.
LR29186
DESIGN FEATURES
♦ Occupies a very small panel space
♦ May be mounted singly, in continuous rows,
♦ Available with a screw terminal molded
♦ 4 SPDT contacts
SPECIFICATIONS
Operating Mode: Power Relay
Operating Time: Operate time at 20°C (68°F) and
rated voltage:
closed contacts/less than 18 milliseconds on AC
and less than 15 milliseconds on DC.
Release Time: Between energizing and closing of
normally open contacts/less than 35 milliseconds
on AC and less than 30 milliseconds on DC.
Between de-energizing and opening of normally
open contacts/less than 70 milliseconds on AC and
less than 8 milliseconds on DC.
closed contacts/less than 85 milliseconds on AC
and less than 25 milliseconds on DC.
Contacts: Silver plated.
Life: Load Life:
or in groups.
socket.
Between energizing and opening of normally
Between de-energizing and closing of normally
Mechanical Life: 100 million operations
48
♦ Magnetic blow-out device option increases
♦ In both AC and DC operation, the addition of
Power Consumption: Typical power consumption
at rated voltage is: 6VA for AC coils, 6 Watts for
DC coils
There is no surge current during operation.
Insulation Resistance: Between all non-connected
terminals as well as between non-connected
terminals and the relay yoke: 1000 megohms at
500 volts DC
Dielectric: 2000 volts RMS 60 Hz between points
specified above.
Operating Temperature Range: 0° to 60°C (32°F
to 140°F)
Mounting Terminals: 16 flat base pins. Screw
terminal sockets are available.
Shock: The relay, when kept energized by means
of one of its own contact sets, will withstand 40g
shock load when operating on DC, and 150g shock
load on AC.
Vibration: Single axis fragility curve data are
available on request at frequencies from 5 Hz to
33 Hz.
Wire Connection: The 16 flat pins are arranged in
four symmetrical rows of four pins; the pitch in
both directions being .394". Connection may be
made to the relay by soldering. Sockets are
available with screw terminals.
symmetrical as shown in the adjacent figure,
allowing the relay to be inserted into the socket in
either of two positions. Terminals B2 and B3 are
provided as extra connections for special applica-
tions.
Approximate Net Weight: 10.9 oz
the DC current carrying capacity
approximately ten times for both N.O. & N.C.
contacts.
the device will normally double the contact
life, due to reduced arcing.
The internal wiring of the relay is also
Technical Support Center 1-800-522-6752
www.tycoelectronics.com
Electronics