T494D106M050AH Kemet, T494D106M050AH Datasheet - Page 127

• Manufacturer Part Number: T494D106M050AH
• Manufacturer: Kemet

Specifications of T494D106M050AH

• Tolerance (+ Or -): 20%
• Voltage: 50VDC
• Esr: 700mOhm
• Mounting Style: Surface Mount
• Construction: SMT Chip
• Case Style: Molded
• Case Code: D
• Df: 6%
• Dcl: 5uA
• Specification: Coml-Low ESR-Ind
• Operating Temp Range: -55C to 125C
• Capacitance: 10uF
• Package / Case: 7343
• Lead Free Status / RoHS Status: Not Compliant

Tantalum Surface Mount Capacitors – Low ESR
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624.
Figure 2 – Maximum Component Rotation
Figure 3 – Maximum Lateral Movement
Figure 4 – Bending Radius
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the
carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300±10 mm/minute.
8mm & 12mm Tape
Bo
Embossed
Carrier
12mm & 16mm
Tape Width
8mm
Ao
R
T
°
0.5 mm maximum
0.5 mm maximum
Bending
Radius
Maximum Component Rotation
8,12
Tape
Width (mm)
16-200
Typical Component Centerline
Typical Pocket Centerline
Punched
Carrier
0.1 Newton to 1.0 Newton (10gf to 100gf)
0.1 Newton to 1.3 Newton (10gf to 130gf)
Top View
R
16mm Tape
10
Maximum
Rotation (
20
Peel Strength
1.0 mm maximum
1.0 mm maximum
T
°
)
s
°
Maximum Component Rotation
8,12
72-200
Tape
Width (mm)
16-56
Side View
Maximum
10
Rotation (
20
5
S
°
)
TC101-1 • 5/11/2011
127