91388-1 TE Connectivity, 91388-1 Datasheet - Page 5
91388-1
Manufacturer Part Number
91388-1
Description
Crimp Tool
Manufacturer
TE Connectivity
Series
PRO-CRIMPER IIIr
Type
Crimpersr
Specifications of 91388-1
Wire Size (awg)
22-18
Crimp Application
Contacts
Rohs Compliant
NA
Product
Crimping, Stripping & Cutting Tools & Drills
Description/function
Pro-Crimper and die
Fits Cable/wire
22-18 AWG
Lead Free Status / RoHS Status
Supplier Unconfirmed
For Use With
4.2 Mm PE Series PCB Connectors
Lead Free Status / Rohs Status
RoHS Exempt Product
8. MAINTENANCE
Ensure that the tool and dies are clean by wiping
them with a clean, soft cloth. Remove any debris with
a clean, soft brush. Do not use objects that could
damage the tool. When not in use, keep handles
closed to prevent objects from becoming lodged in
the crimping dies, and store in a clean, dry area.
9. VISUAL INSPECTION
The crimping dies should be inspected on a regular
basis to ensure that they have not become worn or
Rev O
3. Observe the ratchet adjustment wheel. If a
tighter crimp is required, rotate the adjustment
wheel COUNTERCLOCKWISE to a
higher–numbered setting. If a looser crimp is
required, rotate the adjustment wheel
CLOCKWISE to a lower–numbered setting.
4. Replace the lockscrew.
5. Make a sample crimp and measure the crimp
height. If the dimension is acceptable, replace and
secure the lockscrew. If the dimension is
unacceptable, continue to adjust the ratchet, and
again measure a sample crimp.
PRO–CRIMPER III Hand Tool Assembly 91388–1
damaged. Inspect the crimp sections for flattened,
chipped, worn, or broken areas. If damage or
abnormal wear is evident, the tool must be replaced.
See Section 10, REPLACEMENT.
10. REPLACEMENT
Customer–replaceable parts are shown in Figure 1.
Available separately, PRO–CRIMPER III Repair Kit
679221–1 includes a replacement nut and a variety of
pins, rings, screws, and springs. If the dies are
damaged or worn excessively, they must be replaced.
Order the repair kit and replaceable parts through
your Tyco Electronics Representative, or call
1–800–526–5142, or send a facsimile of your
purchase order to 1–717–986–7605, or write to:
11. REVISION SUMMARY
Per EC: 0990–0466–04
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS CORPORATION
P.O. BOX 3608
HARRISBURG, PA 17105–3608
S Initial release of document
408–8918
5 of 5