DEMOQE128 Freescale, DEMOQE128 Datasheet - Page 41

• Manufacturer Part Number: DEMOQE128
• Manufacturer: Freescale

Specifications of DEMOQE128

• Lead Free Status / RoHS Status: Compliant

8.2
8.2.1
DEMOQE128 User Manual
RS232 Communications
J6 - SCI RXD Signal Selection Jumper RXD_EN
The DEMOQE128 integrates an RS232 transceiver for the microcontroller
SCI signals. The transceiver operates from 1.8V to 4.25V, and it can be
enabled or disabled via jumper settings or through firmware control. The
DEMOQE128 also integrates the SCI signal into the Embedded Multilink
circuitry. A user can communicate with the microcontroller SCI module via
either the on-board DB9 connector or the Embedded Multilink circuitry. There
are three jumpers associated with SCI communication.
Select the battery pack to supply microcontroller VDD
Select the MCU_PORT to supply microcontroller VDD. This setting
also allows power to be supplied to the target connected to the
MCU_PORT. By default this jumper is installed.
Connects the microcontroller PTB0/RXD signal to the RS232
transceiver.
Figure 8-3: VDD_SELECT Option Header (J5)
37