DEMOQE128 Freescale, DEMOQE128 Datasheet - Page 44

• Manufacturer Part Number: DEMOQE128
• Manufacturer: Freescale

Specifications of DEMOQE128

• Lead Free Status / RoHS Status: Compliant

8.4.1
8.4.2
8.4.3
40
Figure 8-8: Jumper Settings for Input Signals to P&E’ s Embedded Multilink, P&E
Figure 8-9: Jumper Settings for Light Touch Switches KEY_ENABLE (J12)
J11 - P&E’ s Logic Analyzer Inputs IN0/IN1
J12 - Light Touch Switch Enable Jumper KEY_ENABLE
J18 - Reset Switch Enable and Reset LED Display Enable Jumper
RESET_EN
The logic analyzer inputs are marked on one side of the J11 jumper. The
inputs allow P&E’ s PC-based logic analyzer application to display these
signals in real-time.
By installing both jumpers, the logic analyzer pins IN0 and IN1 will be
connected to PTC0 and PTC1 respectively.
By removing these jumpers IN0 and IN1 will be unconnected. The
user may connect these signals, via wires, to any other signals on the
processor which they wish to view on the PC.
Enables the corresponding switch. Each jumper may be individually
installed or removed. By default, all jumpers are installed to enable all
the switches.
Enables the Reset Switch and the Reset LED Display. Each jumper
INPUT_EN (J11)
DEMOQE128 User Manual