BLKD510MO Intel (CPU), BLKD510MO Datasheet - Page 16

• Manufacturer Part Number: BLKD510MO
• Manufacturer: Intel (CPU)

Specifications of BLKD510MO

• Lead Free Status / RoHS Status: Supplier Unconfirmed

1.4
16
The board has two 240-pin DDR2 DIMM sockets and supports the following memory
features:
•
•
•
•
•
•
•
NOTE
Due to passively-cooled thermal constraints, system memory must have an operating
temperature rating of 85
The board is designed to be passively cooled in a properly ventilated chassis. Chassis
venting locations are recommended above the system memory area for maximum
heat dissipation effectiveness.
NOTE
To be fully compliant with all applicable DDR2 SDRAM memory specifications, the
board should be populated with DIMMs that support the Serial Presence Detect (SPD)
data structure. This allows the BIOS to read the SPD data and program the chipset to
accurately configure memory settings for optimum performance. If non-SPD memory
is installed, performance and reliability may be impacted or the DIMMs may not
function under the determined frequency.
Table 3 lists the supported DIMM configurations.
Table 3. Supported Memory Configurations
Note: In the second column, “DS” refers to double-sided memory modules (containing two rows of SDRAM)
DIMM
Capacity
256 MB
256 MB
512 MB
512 MB
512 MB
1024 MB
1024 MB
2048 MB
DDR2 SDRAM DIMMs with gold-plated contacts
Unbuffered, single-sided or double-sided DIMMs
4 GB maximum total system memory
Minimum total system memory: 256 MB
Non-ECC DIMMs
Serial Presence Detect
DDR2 800 MHz and DDR2 667 MHz DIMMs
System Memory
and “SS” refers to single-sided memory modules (containing one row of SDRAM).
Configuration
SS
SS
DS
SS
SS
DS
SS
DS
o
C.
SDRAM
Density
256 Mbit
512 Mbit
256 Mbit
512 Mbit
1 Gbit
512 Mbit
1 Gbit
1 Gbit
SDRAM Organization
Front-side/Back-side
32 M x 8/empty
32 M x 16/empty
32 M x 8/32 M x 8
64 M x 8/empty
64 M x 16/empty
64 M x 8/64 M x 8
128 M x 8/empty
128 M x 8/128 M x 8
Number of SDRAM
Devices
8
4
16
8
4
16
8
16