BLKD510MO Intel (CPU), BLKD510MO Datasheet - Page 68

• Manufacturer Part Number: BLKD510MO
• Manufacturer: Intel (CPU)

Specifications of BLKD510MO

• Lead Free Status / RoHS Status: Supplier Unconfirmed

3.6.2
3.7
3.7.1
3.7.2
68
During POST, an Intel
be augmented with a custom splash screen. The Intel
available from Intel can be used to create a custom splash screen.
NOTE
If you add a custom splash screen, it will share space with the Intel branded logo.
In the BIOS Setup program, the user can choose to boot from optical drives, hard
drives, removable media or the network. The default setting is for the optical drive to
be the first boot device, the hard drive second, and removable media third. If
enabled, the last default boot device is the network.
Booting from CD-ROM is supported in compliance to the El Torito bootable CD-ROM
format specification. Under the Boot menu in the BIOS Setup program, ATAPI
CD-ROM is listed as a boot device. Boot devices are defined in priority order.
Accordingly, if there is not a bootable CD in the CD-ROM drive, the system will attempt
to boot from the next defined drive.
The network can be selected as a boot device. This selection allows booting from the
onboard LAN or a network add-in card with a remote boot ROM installed.
Pressing the <F12> key during POST automatically forces booting from the LAN. To
use this key during POST, the User Access Level in the BIOS Setup program's Security
menu must be set to Full.
For information about
Intel Integrator Toolkit
Boot Options
Custom Splash Screen
CD-ROM Boot
Network Boot
®
splash screen is displayed by default. This splash screen can
Refer to
http://developer.intel.com/design/motherbd/software/itk/
®
Integrator’s Toolkit that is