BOXDP55SB Intel (CPU), BOXDP55SB Datasheet - Page 50

• Manufacturer Part Number: BOXDP55SB
• Manufacturer: Intel (CPU)

Specifications of BOXDP55SB

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Intel Desktop Board DP55SB Technical Product Specification
2.2.2.4.2
2.2.2.4.3
2.2.2.4.4
50
Pins 5 and 7 can be connected to a momentary single pole, single throw (SPST) type
switch that is normally open. When the switch is closed, the board resets and runs the
POST.
Pins 2 and 4 can be connected to a one- or two-color LED. Table 19 shows the
possible states for a one-color LED. Table 20 shows the possible states for a two-color
LED.
Table 19. States for a One-Color Power LED
Table 20. States for a Two-Color Power LED
NOTE
The colors listed in Table 19 and Table 20 are suggested colors only. Actual LED
colors are chassis-specific.
Pins 6 and 8 can be connected to a front panel momentary-contact power switch. The
switch must pull the SW_ON# pin to ground for at least 50 ms to signal the power
supply to switch on or off. (The time requirement is due to internal debounce circuitry
on the board.) At least two seconds must pass before the power supply will recognize
another on/off signal.
LED State
Off
Steady Green
LED State
Off
Steady Green
Steady Yellow
Reset Switch Header
Power/Sleep LED Header
Power Switch Header
Description
Power off/sleeping
Running
Description
Power off
Running
Sleeping