8-1393792-8 TE Connectivity, 8-1393792-8 Datasheet - Page 203

• Manufacturer Part Number: 8-1393792-8
• Description: Electromechanical Relay DPDT 3A 12VDC 968Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 8-1393792-8

• Contact Arrangement: DPDT
• Dc Coil Voltage: 12 V
• Coil Current: 12.4 mA
• Mounting: Through Hole

Features
• Meet UL Tungsten TV-5 rating.
• 2 Form A contact arrangements.
• Meet UL, CSA, SEMKO and SEV requirements.
• Meet 4,000V dielectric voltage between coil and contacts.
• Meet 10,000V surge voltage between coil and contacts (1.2 / 50 s).
Contact Ratings
Ratings: 5A @ 250VAC resistive, 100,000ops.
Max. Switched Voltage: AC: 277V.
Max. Switched Current: 10A.
Max. Switched Power: 1,250VA, 380W.
Contact Data @ 20 C
Arrangements: 2 Form A (DPST-NO).
Material: AgSnO.
Max. Switching Rate: 300 ops./min. (no load).
Expected Mechanical Life: 10 million operations (no load).
Expected Electrical Life: 100,000 operations (rated load).
Minimum Load: 100mA @ 5VDC.
Initial Contact Resistance: 100 milliohms @ 1A, 6VDC.
Initial Dielectric Strength
Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute).
Between Coil and Contacts: 4,000VAC 50/60 Hz. (1 minute).
Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50 s).
Surge Voltage Between Contact and other Pole: 6,000V (1.2 / 50 s).
Initial Insulation Resistance
Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM.
Dimensions are shown for
reference purposes only.
Coil Data
Voltage: 5 to 48VDC.
Nominal Power: 540 mW
Coil Temperature Rise: 50 C max., at rated coil voltage.
Max. Coil Power: 130% of nominal.
Duty Cycle: Continuous.
8A @ 250VDC resistive, 50,000ops.
TV-5 @ 120VAC Tungsten, 25,000ops.
30 ops./min. (rated load).
DC: 30V.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Catalog 1308242
Issued 3-03
PCG
2 Pole Miniature
Power PC Board Relay
Appliances, Audio Equipment, Office Machines
Environmental Data
Temperature Range:
Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude
Shock, Mechanical: 1,000m/s
Operating Humidity: 20 to 85% RH. (Non-condensing).
Operate Data
Must Operate Voltage: 80% of nominal voltage or less.
Must Release Voltage: 5% of nominal voltage or more.
Operate Time:15 ms max.
Release Time: 5 ms max.
Mechanical Data
Termination: Printed circuit terminals.
Enclosure (94V-0 Flammability Ratings):
Weight: 0.63 oz (18g) approximately.
Coil Data @ 20 C
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Rated Coil
Voltage
(VDC)
Operating: -30 C to +70 C
12
24
48
UL File No. E82292
CSA File No. LR48471
SEMKO File No. 8744066
SEV File No. 98110096
5
6
9
Operational: 100m/s
PCG-N: Vented (Flux-tight) snap-on cover.
Specifications and availability
subject to change.
Operational: 10 to 55 Hz., 1.5mm double amplitude.
series
Nominal
Current
(mA)
106.4
88.0
58.0
44.4
21.8
11.0
(ohms)
2
Resistance
(10G approximately).
2
1,100
4,400
Coil
(100G approximately).
155
270
47
68
PCG
10%
Must Operate
Voltage
19.20
38.40
(VDC)
4.00
4.80
7.20
9.60
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Must Release
Voltage
(VDC)
0.25
0.30
0.45
0.60
1.20
2.40
OEG
493