8-1393792-8 TE Connectivity, 8-1393792-8 Datasheet - Page 476

• Manufacturer Part Number: 8-1393792-8
• Description: Electromechanical Relay DPDT 3A 12VDC 968Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 8-1393792-8

• Contact Arrangement: DPDT
• Dc Coil Voltage: 12 V
• Coil Current: 12.4 mA
• Mounting: Through Hole

1406
High Performance DC Tubular Solenoids – Series 3000
High Performance Custom Solenoids – Series 7000
Dimensions are shown for
reference purposes only.
DC tubular pull-type solenoids are
designed to provide up to 90 lbs of
force with a maximum stroke of .500
inches.
Actual usable force will depend on
the stroke and power level.
Coils are available from 6 to 115 Vdc
with a continuous duty power level
of 2.2 to 54 watts and an
intermittent duty power level of 12 to
585 watts.
Solenoid Styles
High Temperature
Two Coil Designs
Custom configurations available
Pressure Sealed
Commercial AC
Heavy Duty
400Hz AC
Tyco Electronics can provide customized solenoids with many of the following features :
Airframe
Pull-Type Solenoid
Screw, Solder & Stud Terminals
Square Flange AN Connectors
Right Angle AN Connectors
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Connector Assemblies
Connector Styles
Quick-Connects
Flexible Leads
DC tubular push-type solenoids
provide up to 50 lbs of force with a
maximum stroke of .562 inches.
Actual usable force will depend on
the stroke and power level.
Coils are available from 6 to 115 Vdc
with a continuous duty power level of
3 to 36 watts and an intermittent
duty power level of 9 to 240 watts.
Custom configurations available
Push-Type Solenoid
Catalog 1308242
Issued 3-03
Specifications and availability
subject to change.
Mounting Styles
Threaded Flanges
Shaped Flanges
Square Flanges
Round Flanges
DC tubular switch-type solenoids
provide up to 120 lbs of force with a
maximum stroke of 1 inch.
Actual usable force will depend on
the stroke and power level.
Coils are available from 12 to 115
Vdc. Two coils are utilized, one
energized at pull-in for extra force
and a holding coil for continuous
operation. Intermittent duty power
level of 112 to 700 watts and a
continuous power level of 3 to 14
watts.
Custom configurations available
Switch-Type Solenoid
Extension Plungers
Plunger Styles
Captive Plungers
External Threads
Clevice Plungers
Internal Threads
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
CII