ACST210-8FP STMicroelectronics, ACST210-8FP Datasheet - Page 8

• Manufacturer Part Number: ACST210-8FP
• Description: IC AC SW 2A 800V 10MA TO22-FPAB
• Manufacturer: STMicroelectronics
• Series: ACS™/A.S.D®r

Specifications of ACST210-8FP

• Triac Type: Logic - Sensitive Gate
• Mounting Type: Through Hole
• Configuration: Single
• Current - Hold (ih) (max): 10mA
• Voltage - Off State: 800V
• Current - Gate Trigger (igt) (max): 10mA
• Current - Non Rep. Surge 50, 60hz (itsm): 8A, 8.4A
• Current - On State (it (rms)) (max): 2A
• Voltage - Gate Trigger (vgt) (max): 1.1V
• Package / Case: TO-220AB
• Current - On State (it (rms) (max): 2A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-10642-5

Application information
2.3
8/13
Figure 18. Typical current and voltage waveforms across the ACST2 during
Electrical noise immunity
The ACST2 is a sensitive device (I
simple resistor by a logic level circuit, and still provides a high electrical noise immunity. The
intrinsic immunity of the ACST2 is shown by the specified dV/dt equal to 500 V/µs @ 125 °C.
This immunity level is 5 to 10 times higher than the immunity provided by an equivalent
standard technology Triac with the same sensitivity. In other words, the ACST2 is sensitive,
but has an immunity usually available only for non-sensitive device (I
IEC 61000-4-5 standard test
V
I
Doc ID 13304 Rev 3
GT
= 10 mA) and can be controlled directly though a
1.2/50 µs voltage surge
8/20 µs current surge
V peak = V CL
GT
0
0
higher than 35 mA).
ACST2