103308-6 TE Connectivity, 103308-6 Datasheet - Page 87

• Manufacturer Part Number: 103308-6
• Description: Conn Shrouded Header HDR 26 POS 2.54mm Solder ST Thru-Hole
• Manufacturer: TE Connectivity
• Type: Shrouded Headerr
• Series: AMP-LATCHr

Specifications of 103308-6

• Pitch: 2.54 mm
• Number Of Rows: 2
• Number Of Contacts: 26
• Gender: HDR
• Contact Plating: Gold Over Nickel/Gold Over Palladium Nickel
• Termination Method: Solder
• Pitch (mm): 2.54mm
• Number Of Contact Rows: 2
• Mounting Style: Through Hole
• Body Orientation: Straight
• Operating Temp Range: -65C to 105C
• Current Rating (max): 1/ContactA
• Contact Material: Copper Alloy
• Housing Material: Thermoplastic
• Housing Color: Black
• Product Height (mm): 9.77mm
• Product Length (mm): 40.64mm
• Product Depth (mm): 9.14mm
• Connector Type: Wire To Board
• Contact Termination: Through Hole
• No. Of Contacts: 26
• No. Of Rows: 2
• Pitch Spacing: 2.54mm
• Rohs Compliant: No
• Product Line: AMP-LATCH
• Profile: Low
• Pcb Mounting Orientation: Vertical
• Pcb Mount Retention: Without
• Mating Connector Lock: Without
• Housing Style: 4-Sided
• Ejection Latches: Without
• Post Size (mm [in]): 0.64 [.025]
• Shrouded: Yes
• [shrouded] End Dimension (mm [in]): 3.81 [0.150]
• Current Rating (a): 1
• Insulation Resistance (m?): 5,000
• Termination Post Length (mm [in]): 3.05 [0.120]
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Header Type: Pin Header
• Number Of Positions: 26
• Centerline, Matrix (mm [in]): 2.54 x 2.54 [.100 x .100]
• Daisy Chain: With
• Preloaded: Yes
• Contact Plating, Mating Area, Material: Gold (15), Gold Flash over Palladium Nickel
• Contact Shape: Square
• Contact Base Material: Copper Alloy
• Connector Style: Header - Pin
• Mating Alignment Type: Center, Dual Polarizing Bar
• Mating Alignment: With
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: ELV compliant, 5 of 6 Compliant
• Lead Free Solder Processes: Not suitable for lead free processing
• Approved Standards: UL E28476, CSA LR7189
• Operating Temperature (°c): -65 – +105
• Temperature Rating: Standard
• Lead Free Status / RoHS Status: Not Compliant

5
170
Comp-U-Sertor II Insertion Machine No. 122300-1
This machine has a compact, microprocessor-controlled
X-Y positioning table for inserting a variety of AMP posts,
sockets and receptacles at rates up to 14,000 contacts per
hour. It is programmed and operated with an easy-to-use,
menu-driven touchscreen. Programs are stored in a
battery-backed Random Access Memory. A 3.5” floppy
disk drive is provided for off-line programming and storage.
Insertion heads are interchangeable. The insertable area
is 12 x 18 [305 x 457]. The power requirement is 120 VAC,
50-60 Hz, 7 A; the air requirement is 90 psi [6.21 bar]
at 2-15 scfm [0.00094-0.00708 m
application.
For further information, request Tyco Electronics Customer
Manual 409-5863.
Catalog 1307819
Catalog 1307819
Revised 6-04
Revised 6-04
www.tycoelectronics.com
www.tycoelectronics.com
Dimensions are in inches and
Dimensions are in inches and
millimeters unless otherwise
millimeters unless otherwise
specified. Values in brackets
specified. Values in brackets
are metric equivalents.
are metric equivalents.
AMPMODU Interconnection System
Application Tooling for Post Insertion
3
/s], depending upon
Photo 96187-1
Dimensions are shown for
Dimensions are shown for
reference purposes only.
reference purposes only.
Specifications subject
Specifications subject
to change.
to change.
P300 Automatic Insertion Machine
The P300 is a fully automatic insertion machine for
processing reeled press-fit and thru-hole components into
PCBs. It is available as either a stand-alone unit or as an
inline system. Boards up to 15.5” x 23.5” [400 x 600] can
be processed and are positioned by an X\Y table. Each
contact is seated in the PCB via a product specific
insertion head. An optional automatic tool changer system
allows up to 3 different insertion heads to be used. A multi-
tasking control unit controls and monitors the entire system.
Optional insertion force monitoring allows the verification of
every component applied for quality assurance. A wide
range of optional equipment is available for further
performance and flexibility enhancement.
Please consult Tyco Electronics for further information on
this machine.
Modular Insertion System Bench
Machine No. 217600-1
This machine uses AMP insertion heads to install a variety
of printed circuit board products at rates of 2,000 per hour.
The printed circuit board is placed in a Board Holding
Fixture which is attached to a two-hand controlled
mechanism. The operator moves the board over the
machine anvil; a switch in the anvil actuates the machine
when the printed circuit board is placed on the anvil. A
spotlight illuminates the insertion area.
Consult Tyco Electronics for further information on this
machine and the insertion heads.
USA: 1-800-522-6752
USA: 1-800-522-6752
Canada: 1-905-470-4425
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Japan: 81-44-844-8013
UK: 44-141-810-8967
UK: 44-141-810-8967
Photo 98731