104130-4 TE Connectivity, 104130-4 Datasheet - Page 105

• Manufacturer Part Number: 104130-4
• Description: Conn Ejector Header HDR 20 POS 2.54mm Solder RA Thru-Hole
• Manufacturer: TE Connectivity
• Type: Ejector Headerr

Specifications of 104130-4

• Pitch: 2.54 mm
• Number Of Rows: 2
• Number Of Contacts: 20
• Gender: HDR
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Pitch (mm): 2.54mm
• Number Of Contact Rows: 2
• Mounting Style: Through Hole
• Body Orientation: Right Angle
• Operating Temp Range: -65C to 105C
• Current Rating (max): 1/ContactA
• Contact Material: Copper Alloy
• Housing Material: Thermoplastic
• Housing Color: Black
• Product Height (mm): 9.14mm
• Product Length (mm): 33.02mm
• Product Depth (mm): 25.83mm
• Width: 1.300"
• Peak Reflow Compatible (260 C): No
• Terminal Type: Right Angle PCB Thru Hole
• Body Material: Thermoplastic
• Leaded Process Compatible: No
• Mounting Type: Through Hole
• Rohs Compliant: No
• Product Line: AMP-LATCH
• Profile: Low
• Pcb Mounting Orientation: Right Angle
• Pcb Mount Retention: Without
• Mating Connector Lock: Without
• Housing Style: 4-Sided
• Ejection Latches: With
• Post Size (mm [in]): 0.64 [.025]
• Shrouded: Yes
• [shrouded] End Dimension (mm [in]): 3.81 [0.150]
• Current Rating (a): 1
• Insulation Resistance (m?): 5,000
• Termination Post Length (mm [in]): 3.43 [0.135]
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Header Type: Pin Header
• Number Of Positions: 20
• Centerline, Matrix (mm [in]): 2.54 x 2.54 [.100 x .100]
• Daisy Chain: With
• Preloaded: Yes
• Contact Plating, Mating Area, Material: Gold (30), Gold Flash over Palladium Nickel
• Contact Shape: Square
• Contact Base Material: Copper Alloy
• Connector Style: Header - Pin
• Mating Alignment Type: Center, Dual Polarizing Bar
• Mating Alignment: With
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not suitable for lead free processing
• Approved Standards: UL E28476, CSA LR7189
• Operating Temperature (°c): -65 – +105
• Temperature Rating: Standard
• Lead Free Status / RoHS Status: Not Compliant

5
188
Product Facts
Catalog 1307819
Catalog 1307819
Revised 6-04
Revised 6-04
www.tycoelectronics.com
www.tycoelectronics.com
Surface mount leads
All receptacle assemblies
are end stackable
Contact design employs
dual cantilever beams with
built-in anti-overstress
feature
Closed entry housings help
prevent post stubbing
Housings made of high
temperature, surface mount
compatible thermoplastic
material, 94 V-0 rated
Duplex gold and bright tin-
lead plated contacts have
full nickel underplate
Housings feature PC board
standoffs
Recognized under the
Component Program of
Underwriters Laboratories
Inc., File No. E28476
Certified by Canadian
Standards Association, File
No. LR 7189
Dimensions are in inches and
Dimensions are in inches and
millimeters unless otherwise
millimeters unless otherwise
specified. Values in brackets
specified. Values in brackets
are metric equivalents.
are metric equivalents.
AMPMODU Interconnection System
Performance
Characteristics
Mechanical Characteristics:
Mating Force—6.0 oz. [1.67N] per
contact (max.)
Unmating Force—.75 oz. [0.21N] per
contact (min.) during third mating cycle
Durability—200 cycles
Environmental Characteristics:
Operating Temperature—
-55°C to +125°C
Mod II Surface Mount Horizontal Receptacle Assemblies, .100 x .100
[2.54 x 2.54] Centerline
Horizontal surface mount
receptacle assemblies are
designed to reliably and
economically meet the
packaging and
interconnection
requirements of today’s
electronic industry as
process technologies
evolve from wave soldering
to surface mount
processing.
This broad product line is
offered in both single and
Dimensions are shown for
Dimensions are shown for
reference purposes only.
reference purposes only.
Specifications subject
Specifications subject
to change.
to change.
double row configurations.
The .100 [2.54] centerline
assemblies are available in
2-40 (single row) positions
and 4-80 (double row)
positions. Housings are end
stackable, which gives the
advantage of added
flexibility.
The housings are made of
high temperature material
that is 94 V-0 rated.
Contacts are phosphor
bronze, fully underplated
Electrical Characteristics:
Current Rating—3.0 amperes (max.)
for single contact; 2.0 amperes (max.)
per contact when connector is fully
energized
Contact Resistance—12 milliohms
(max.)
Insulation Resistance—5000
megohms (min.) between adjacent
contacts
Dielectric Withstanding Voltage
(at sea level)—750 V rms
USA: 1-800-522-6752
USA: 1-800-522-6752
Canada: 1-905-470-4425
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
C. America: 52-55-5-729-0425
with nickel to help prevent
corrosion and are available
in three plating options.
The receptacle contact is
an established proven
design, with a fully
enclosed one-piece "box" to
protect the contact beams
with built-in anti-overstress
feature.
South America: 55-11-3611-1514
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
Japan: 81-44-844-8013
UK: 44-141-810-8967
UK: 44-141-810-8967