104130-4 TE Connectivity, 104130-4 Datasheet - Page 139

• Manufacturer Part Number: 104130-4
• Description: Conn Ejector Header HDR 20 POS 2.54mm Solder RA Thru-Hole
• Manufacturer: TE Connectivity
• Type: Ejector Headerr

Specifications of 104130-4

• Pitch: 2.54 mm
• Number Of Rows: 2
• Number Of Contacts: 20
• Gender: HDR
• Contact Plating: Gold Over Nickel
• Termination Method: Solder
• Pitch (mm): 2.54mm
• Number Of Contact Rows: 2
• Mounting Style: Through Hole
• Body Orientation: Right Angle
• Operating Temp Range: -65C to 105C
• Current Rating (max): 1/ContactA
• Contact Material: Copper Alloy
• Housing Material: Thermoplastic
• Housing Color: Black
• Product Height (mm): 9.14mm
• Product Length (mm): 33.02mm
• Product Depth (mm): 25.83mm
• Width: 1.300"
• Peak Reflow Compatible (260 C): No
• Terminal Type: Right Angle PCB Thru Hole
• Body Material: Thermoplastic
• Leaded Process Compatible: No
• Mounting Type: Through Hole
• Rohs Compliant: No
• Product Line: AMP-LATCH
• Profile: Low
• Pcb Mounting Orientation: Right Angle
• Pcb Mount Retention: Without
• Mating Connector Lock: Without
• Housing Style: 4-Sided
• Ejection Latches: With
• Post Size (mm [in]): 0.64 [.025]
• Shrouded: Yes
• [shrouded] End Dimension (mm [in]): 3.81 [0.150]
• Current Rating (a): 1
• Insulation Resistance (m?): 5,000
• Termination Post Length (mm [in]): 3.43 [0.135]
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Header Type: Pin Header
• Number Of Positions: 20
• Centerline, Matrix (mm [in]): 2.54 x 2.54 [.100 x .100]
• Daisy Chain: With
• Preloaded: Yes
• Contact Plating, Mating Area, Material: Gold (30), Gold Flash over Palladium Nickel
• Contact Shape: Square
• Contact Base Material: Copper Alloy
• Connector Style: Header - Pin
• Mating Alignment Type: Center, Dual Polarizing Bar
• Mating Alignment: With
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not suitable for lead free processing
• Approved Standards: UL E28476, CSA LR7189
• Operating Temperature (°c): -65 – +105
• Temperature Rating: Standard
• Lead Free Status / RoHS Status: Not Compliant

5
222
Material:
Black thermoplastic, flame retardant
Part Nos.
499991-2 (Packaged 50 per bag)
499991-3 (Packaged 1000 per bag)
Related Product Data:
Low Profile Headers used with—
pages 152-157
Catalog 1307819
Revised 6-04
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
AMPMODU Interconnection System
Accessories: Snap-In Polarizer for Low Profile Headers
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Orient the polarizer so that the
polarizer latch is on the same side
as the inner wall (post side) of the
header housing.
Slide the polarizer over the
polarizing slot of the housing until
the latch engages the hole. Snap
off the tab at the break line next to
the housing. Using the remaining
polarizer, repeat the process for the
other housing location.
Note: For Post Shunts, contact TYCO ELECTRONICS.
The snap-in polarizer provides military polarization for low
profile headers. Installation of the polarizer is as follows:
[8.51]
[8.51]
.335
.335
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
[3.40]
.134
[3.40]
.134
(See below.)
Break Line
(See below.)
Break Line
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967
Break Line