CLP-212S Aavid Thermalloy, CLP-212S Datasheet - Page 3

• Manufacturer Part Number: CLP-212S
• Description: CLIP
• Manufacturer: Aavid Thermalloy

Specifications of CLP-212S

• Accessory Type: Clip(s)
• Product: Hardware & Accessories
• Dimensions: 10 mm L x 7 mm W x 5.7 mm H
• Designed For: Sensor Thin Components
• For Use With/related Products: Heat Sinks
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 032622; CLP212S

How to Order The Max Clip System
General Information:
Extrusions are available in standard bar lengths of 2.5 meters/8.2 feet.
Extrusions are unfinished and may be ordered with a black anodize finish.
The standard tolerance of all cut to length extrusions is ±0.015 inches.
Max Extrusion Profiles
Extrusions are ordered using a 12 digit part number as shown below.
78040 X X XXXXX
Max Clips
Clips are ordered separately using the part number shown in the mechanical drawing
header information. See How to Use this Catalog on page 2.
Potential Max Profiles
The Max Clip System
information on the Potential Max Profiles listed on pages 21 and 22, please contact your
local sales representative.
www.aavidthermalloy.com
TM
is only limited by the imagination. For custom solutions or more
AMERICA
EUROPE
Custom cut length
Finish
Cutting options
Extrusion profile base part number
Italy Tel: [phone] email: [e-mail]
United Kingdom Tel: [phone] email: [e-mail]
USA Tel: [phone] email: [e-mail]
Specified to 3 decimal places i.e. 1.200 inches = 01200
For cut length options 1 and 2 use 5 zeros
U = Unfinished
B = Black anodize
1 = No cut (full length bar)
2 = Cut in half (two equal lengths)
3 = Cut to custom length specified using digits 8-12
TM
ASIA
Singapore Tel: [phone] email: [e-mail]
Taiwan Tel: [phone] email: [e-mail]
How to Order
3