CLP-212S Aavid Thermalloy, CLP-212S Datasheet - Page 36

• Manufacturer Part Number: CLP-212S
• Description: CLIP
• Manufacturer: Aavid Thermalloy

Specifications of CLP-212S

• Accessory Type: Clip(s)
• Product: Hardware & Accessories
• Dimensions: 10 mm L x 7 mm W x 5.7 mm H
• Designed For: Sensor Thin Components
• For Use With/related Products: Heat Sinks
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 032622; CLP212S

36
1.
1.1
2.
2.1
2.2
2.3
2.4
2.5
3.
3.1
3.1.1
3.1.2
3.1.3
3.1.4
3.1.5
3.2
3.2.1
3.2.2
3.2.3
3.2.4
3.2.5
4.
4.1
5.
5.1
6.
6.1
7.
7.1
8.
8.1
8.2
8.3
8.4
8.5
9.
9.1
Provided by PENNY + GILES • Test Certificate No. 3318
www.aavidthermalloy.com
Shock and Vibration Testing
TEST CONDUCTED
Sine Vibration and 1/2 Sine Shock
SPECIMEN DATA
No. Off:
Identification:
Reference No.(s):
Serial No.(s):
Condition received:
SPECIFICATIONS AND/OR NATIONAL STANDARDS
Equipment Specification
Authority:
Title:
Issue:
Data:
Requirements:
RELATED NATIONAL STANDARD
Authority:
Title:
Issue:
Data:
Requirement(s):
CLIENT
El.Bo.Mec Thermalloy - Via Del Tipografo, 4 - 40138 Bologna, Italy
RECEIPT OF TEST SPECIMEN
Specimen received 28.05.98 under request to test form No. 3318, dated 28.05.98.
DATE OF TEST
Test commenced and completed 01.06.98.
DISPOSAL OF TEST SPECIMEN
Specimen returned to client under delivery note 1362 dated 02.06.98.
TEST METHOD/PROCEDURE
The heat sink assembly was mounted onto the shaker table and subjected to a sinusoidal vibration test as follows:
Frequency Range:
Vibration Amplitude:
Rate of Change of Frequency:
Test Duration:
During the above 20 minute period the heat sink assembly was observed visually
for evidence of the max mounts becoming detached.
The procedures described in 8.1 and 8.2 above were repeated such that vibration test
was conducted in all three mutually perpendicular axes.
The heat sink assembly was then subjected to a shock test as follows:
Shock Pulse Envelope:
Period:
Amplitude:
Number of Shocks:
Application:
During the above 20 minute period the heat sink assembly was observed visually
for evidence of the max mounts becoming detached.
TEST RESULTS
The max clips did not break free from the heat sink assembly. No physical degradation was observed.
AMERICA
EUROPE
As date
N/A
N/A
N/A
N/A
N/A
BSI
BS2011
Test Ea: 1988, Test Fc: 1983.
Tests Ea and Fc, as modified by Request To Test form 3318
Italy Tel: [phone] email: [e-mail]
United Kingdom Tel: [phone] email: [e-mail]
4 off
Heat sink S509/40 with MAX Clips retaining 4 off semiconductors
MAX 01, MAX 02, MAX 03, MAX 04
1, 2, 3, and 4
OK
8 Hz to 100 Hz
± 3g pk
1 Octave per minute
20 minutes
112 sine
6 ms
5 g
3
3 shocks per sense per axis
USA Tel: [phone] email: [e-mail]
ASIA
Singapore Tel: [phone] email: [e-mail]
Taiwan Tel: [phone] email: [e-mail]