LAN9218-MT Standard Microsystems (SMSC), LAN9218-MT Datasheet - Page 126

• Manufacturer Part Number: LAN9218-MT
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9218-MT

• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 2.97V
• Operating Supply Voltage (max): 3.63V
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 100
• Lead Free Status / RoHS Status: Compliant

Revision 2.7 (03-15-10)
7.4
10BASE-T Operation
D0, 10BASE-T /w traffic
D0, Idle
D1, Idle
D2, Energy Detect Power Down
D2, General Power Down
100BASE-TX Operation
D0, 100BASE-TX /w traffic
D0, Idle
D1, Idle
D2, Energy Detect Power Down
D2, General Power Down
This section provides typical power consumption values for a complete Ethernet interface based on
the LAN9218, including the power dissipated by the magnetics and other passive components.
Please refer to the SMSC application note AN14.10 - “Migrating from LAN9118 to the LAN9218I”, that
can be found on SMSC’s web site www.smsc.com, which contains additional details on magnetics and
other components used.
Note: The power measurements list below were taken under the following conditions:
Temperature: ................................................................................................................................... +25°C
Device VDD:................................................................................................................................... +3.30V
Note: Power dissipation is determined by operating frequency, temperature, and supply voltage, as
Power Consumption (Device and System Components)
well as external source/sink requirements.
Table 7.2 Power Consumption Device and System Components
MODE
DATASHEET
126
High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX Support
Total Power - Typical (mW)
612
620
508
540
577
439
65
65
11
11
SMSC LAN9218
Datasheet