LAN9218-MT Standard Microsystems (SMSC), LAN9218-MT Datasheet - Page 52

• Manufacturer Part Number: LAN9218-MT
• Manufacturer: Standard Microsystems (SMSC)

Specifications of LAN9218-MT

• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (min): 2.97V
• Operating Supply Voltage (max): 3.63V
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 100
• Lead Free Status / RoHS Status: Compliant

Revision 2.7 (03-15-10)
3.12.1
RX Slave PIO Operation
Using PIO mode, the host can either implement a polling or interrupt scheme to empty the received
packet out of the RX data FIFO. The host will remain in the idle state until it receives an indication
(interrupt or polling) that data is available in the RX data FIFO. The host will then read the RX status
FIFO to get the packet status, which will contain the packet length and any other status information.
The host should perform the proper number of reads, as indicated by the packet length plus the start
offset and the amount of optional padding added to the end of the frame, from the RX data FIFO.
Figure 3.15 Host Receive Routine Using Interrupts
Figure 3.16 Host Receive Routine with Polling
Last Packet
Last Packet
DATASHEET
RX_FIFO_
Read RX
Read RX
DWORD
Read RX
Read RX
DWORD
Packet
Packet
Status
Status
Read
Idle
init
INf
init
52
Valid Status DWORD
RX Interrupt
High-Performance Single-Chip 10/100 Ethernet Controller with HP Auto-MDIX Support
Not Last Packet
Not Last Packet
SMSC LAN9218
Datasheet