PIC10F202-E/MC Microchip Technology, PIC10F202-E/MC Datasheet - Page 28

• Manufacturer Part Number: PIC10F202-E/MC
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,LLCC,8PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 10Fr

Specifications of PIC10F202-E/MC

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 3
• Program Memory Size: 768B (512 x 12)
• Program Memory Type: FLASH
• Ram Size: 24 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 8-DFN
• Processor Series: PIC10F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 24 B
• Interface Type: USB
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 4
• Number Of Timers: 1
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• Package: 8DFN EP
• Device Core: PIC
• Family Name: PIC10
• Maximum Speed: 4 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164334 - MODULE SOCKET FOR 8L 2X3MM DFNAC163020-2 - ADAPTER PROGRAM PIC10F 2X3 DFN
• Eeprom Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

Optional Headers
AC162062, AC162079, AC162087, AC162091
DS51292R-page 28
Header Identification
The header AC number is used for ordering the header. However, this number is not
on the header board, as the board is often used for multiple headers by inserting
different ICE/ICD devices. To identify these header boards, use the following
information.
Header Setup and Operation – AC162062
For this header, there are no jumpers/switches. MPLAB IDE will use its selected device
to choose the correct device to emulate.
Test points are available on this header to check the following: V
ground.
The PICDEM™ HPC Explorer Board is 5V, whereas the ICD device on the header is
3.6V max. Therefore, modification to the demo board is necessary before the header
can be used.
1. Switch S3 should be set to ICE.
2. Jumper J2 must be connected as shown in Figure 17 to modify the operating
FIGURE 17:
Header Setup and Operation – AC162079, AC162087, AC162091
For these headers, there are no jumpers/switches. MPLAB IDE will use its selected
device to choose the correct device to emulate.
Test points are available on this header to check the following: V
ground.
This header cannot be plugged directly into the PICDEM™ HPC Explorer Board or
device damage will result.
voltage. See demo board documentation for more information.
AC162062
AC162079
AC162087
AC162091
Header
DEMO BOARD J2 CONNECTIONS
PIC18F87J10-ICE
PIC18F85J90-ICE
PIC18F87J50-ICE
PIC18F87J11-ICE
J2
ICE/ICD Device
+5V
ADJ
R
CAUTION
VIN
For V = 3.3V:
R = 1.18 kΩ (1%)
02-01830
Board Assembly Number
© 2009 Microchip Technology Inc.
DD
DD
, V
, V
DDCORE
DDCORE
and
and