PIC10F202-E/MC Microchip Technology, PIC10F202-E/MC Datasheet - Page 39

• Manufacturer Part Number: PIC10F202-E/MC
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,LLCC,8PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 10Fr

Specifications of PIC10F202-E/MC

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 3
• Program Memory Size: 768B (512 x 12)
• Program Memory Type: FLASH
• Ram Size: 24 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 8-DFN
• Processor Series: PIC10F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 24 B
• Interface Type: USB
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 4
• Number Of Timers: 1
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• Package: 8DFN EP
• Device Core: PIC
• Family Name: PIC10
• Maximum Speed: 4 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164334 - MODULE SOCKET FOR 8L 2X3MM DFNAC163020-2 - ADAPTER PROGRAM PIC10F 2X3 DFN
• Eeprom Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

© 2009 Microchip Technology Inc.
PICDEM MC/MC LV MOTOR CONTROL DEMO BOARDS
To run a BLDC motor on the PICDEM MC board or PICDEM MC LV board using the
supplied firmware, use the following jumper setup:
S1 is not populated and should not be used.
After the header board is set up, do the following:
1. Connect the header to the PICDEM MC/MC LV target board.
2. Power the target board. You should see the red LED on the header board turn on.
3. Connect the debug tool to the header board.
4. Program the part with the demo code.
5. Run the program.
6. Press and release switch S2 on the target board to toggle the direction of the
7. Press and release switch S1 on the target board to toggle between running and
8. If the motor stops while reversing from a high speed, there could be an
motor’s rotation.
stopping the motor.
overcurrent condition detected by the system. Reset the system to run the
program again.
Jumper
J1
J2
J3
J5
J6
J7
Jumper Setting
2-3
2-3
2-3
2-3
1-2
1-2
Jumper
JP1
JP2
JP3
Optional Headers
Jumper Setting
DS51292R-page 39
Open
Open
Open