PIC10F222-E/MC Microchip Technology, PIC10F222-E/MC Datasheet - Page 51

• Manufacturer Part Number: PIC10F222-E/MC
• Description: 768B Flash, 23B RAM, 4 I/O, 8bit ADC 8 DFN 2X3mm TUBE
• Manufacturer: Microchip Technology
• Series: PIC® 10Fr

Specifications of PIC10F222-E/MC

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 8MHz
• Peripherals: POR, WDT
• Number Of I /o: 3
• Program Memory Size: 768B (512 x 12)
• Program Memory Type: FLASH
• Ram Size: 23 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 8-DFN
• Processor Series: PIC10F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 23 B
• Interface Type: USB
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 4
• Number Of Timers: 1
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 2 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164334 - MODULE SOCKET FOR 8L 2X3MM DFNAC163020-2 - ADAPTER PROGRAM PIC10F 2X3 DFNAC162070 - HEADER INTRFC MPLAB ICD2 8/14P
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

RETLW
Syntax:
Operands:
Operation:
Status Affected: None
Description:
RLF
Syntax:
Operands:
Operation:
Status Affected: C
Description:
RRF
Syntax:
Operands:
Operation:
Status Affected: C
Description:
© 2007 Microchip Technology Inc.
Return with Literal in W
[ label ]
0 ≤ k ≤ 255
k → (W);
TOS → PC
The W register is loaded with the
eight-bit literal ‘k’. The program
counter is loaded from the top of
the stack (the return address). This
is a two-cycle instruction.
Rotate Left f through Carry
[ label ]
0 ≤ f ≤ 31
d ∈ [0,1]
See description below
The contents of register ‘f’ are
rotated one bit to the left through
the Carry Flag. If ‘d’ is ‘0’, the
result is placed in the W register. If
‘d’ is ‘1’, the result is stored back in
register ‘f’.
Rotate Right f through Carry
[ label ]
0 ≤ f ≤ 31
d ∈ [0,1]
See description below
The contents of register ‘f’ are
rotated one bit to the right through
the Carry Flag. If ‘d’ is ‘0’, the
result is placed in the W register. If
‘d’ is ‘1’, the result is placed back
in register ‘f’.
C
C
RETLW k
RRF f,d
register ‘f’
register ‘f’
RLF
f,d
SLEEP
Syntax:
Operands:
Operation:
Status Affected: TO, PD, RBWUF
Description:
SUBWF
Syntax:
Operands:
Operation:
Status Affected: C, DC, Z
Description:
SWAPF
Syntax:
Operands:
Operation:
Status Affected: None
Description:
PIC10F220/222
Enter SLEEP Mode
[label]
None
00h → WDT;
0 → WDT prescaler;
1 → TO;
0 → PD
Time-out Status bit (TO) is set. The
Power-down Status bit (PD) is
cleared.
RBWUF is unaffected.
The WDT and its prescaler are
cleared.
The processor is put into Sleep
mode with the oscillator stopped.
See section on Sleep for more
details.
Subtract W from f
[label]
0 ≤ f ≤ 31
d ∈ [0,1]
(f) – (W) → (dest)
Subtract (2’s complement method)
the W register from register ‘f’. If ‘d’
is ‘0’, the result is stored in the W
register. If ‘d’ is ‘1’, the result is
stored back in register ‘f’.
Swap Nibbles in f
[label]
0 ≤ f ≤ 31
d ∈ [0,1]
(f<3:0>) → (dest<7:4>);
(f<7:4>) → (dest<3:0>)
The upper and lower nibbles of
register ‘f’ are exchanged. If ‘d’ is
‘0’, the result is placed in W
register. If ‘d’ is ‘1’, the result is
placed in register ‘f’.
SLEEP
SUBWF f,d
SWAPF f,d
DS41270E-page 49