PIC32MX320F128LT-80I/BG Microchip Technology, PIC32MX320F128LT-80I/BG Datasheet - Page 39

• Manufacturer Part Number: PIC32MX320F128LT-80I/BG
• Description: 128 KB Flash, 32 KB RAM, 80 MHz, 10-Bit ADC 121 XBGA 10x10x1.20mm T/R
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX320F128LT-80I/BG

• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 121-TFBGA
• Processor Series: PIC32MX3xx
• Core: MIPS
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320001, DM320002, MA320001
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of I /o: -
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

4.1
4.2
© 2009 Microchip Technology Inc.
INTRODUCTION
HARDWARE FEATURES
Chapter 4. PIC32MX Starter Kit Hardware
This chapter describes the hardware features of the PIC32MX Starter Kit.
The key features of the PIC32MX Starter Kit are listed below. They are presented in the
order given in Section 1.4 “PIC32MX Functionality and Features”. You can refer to
Figure 1-1 on page 8 for their locations on the board.
4.2.1
The PIC32MX Starter Kit is designed with a permanently mounted (i.e., soldered)
PIC32MX360F512L processor.
4.2.2
There are two ways to supply power to the PIC32MX Starter Kit:
• USB bus power connected to J1.
• An external application board with a regulated DC power supply that provides +5V
One green LED (D3) is provided to show that the PIC32 microcontroller is powered up.
4.2.3
The PIC32MX Starter Kit includes a PIC18LF4550 USB microcontroller, which provides
both USB connectivity and support for protocol translation. The PIC18LF4550 is
hard-wired to the PIC32MX device to provide two types of connectivity:
• I/O pins of PIC18LF4550 to ICSP™ pins of PIC32MX
• I/O pins of PIC18LF4550 to JTAG pins of PIC32MX
The PIC32MX Starter Kit currently uses the JTAG pins of the PIC32MX device for
programming and debugging.
can be connected to the J2 application board connector that is provided on the
bottom side of the board.
Note:
Processor Support
Power Supply
USB Connectivity
The basic PIC32MX Starter Kit does not include an application board and
is intended to be USB-bus powered.
PIC32MX STARTER KIT
USER’S GUIDE
DS61144D-page 35