SST25VF512A-33-4I-QAE Microchip Technology, SST25VF512A-33-4I-QAE Datasheet - Page 7

• Manufacturer Part Number: SST25VF512A-33-4I-QAE
• Description: 2.7V To 3.6V 512Kbit SPI Serial Flash 8 TDFN-S 6x5x0.8mm TUBE
• Manufacturer: Microchip Technology

Specifications of SST25VF512A-33-4I-QAE

• Format - Memory: FLASH
• Memory Type: FLASH
• Memory Size: 512K (64K x 8)
• Speed: 33MHz
• Interface: SPI Serial
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-WDFN Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

512 Kbit SPI Serial Flash
SST25VF512A
Block Protection (BP1, BP0)
The Block-Protection (BP1, BP0) bits define the size of the
memory area, as defined in Table 5, to be software pro-
tected against any memory Write (Program or Erase)
operations. The Write-Status-Register (WRSR) instruction
is used to program the BP1 and BP0 bits as long as WP#
is high or the Block-Protect-Lock (BPL) bit is 0. Chip-Erase
can only be executed if Block-Protection bits are both 0.
After power-up, BP1 and BP0 are set to 1.
Block Protection Lock-Down (BPL)
WP# pin driven low (V
Lock-Down (BPL) bit. When BPL is set to 1, it prevents any
further alteration of the BPL, BP1, and BP0 bits. When the
WP# pin is driven high (V
its value is “Don’t Care”. After power-up, the BPL bit is
reset to 0.
©2006 Silicon Storage Technology, Inc.
IL
), enables the Block-Protection-
IH
), the BPL bit has no effect and
7
TABLE 5: S
Auto Address Increment (AAI)
The Auto Address Increment Programming-Status bit pro-
vides status on whether the device is in AAI programming
mode or Byte-Program mode. The default at power up is
Byte-Program mode.
(Full Memory Array)
(1/4 Memory Array)
(1/2 Memory Array)
1. Default at power-up for BP1 and BP0 is ‘11’.
Protection Level
0
1
2
3
B
OFTWARE
LOCK
P
ROTECTION
Register Bit
BP1
S
0
0
1
1
TATUS
Status
BP0
0
1
0
1
R
1
EGISTER
S71264-02-000
0C000H-0FFFFH
08000H-0FFFFH
00000H-0FFFFH
Memory Area
Protected
None
Data Sheet
T5.0 1264
1/06