5962-87515073A E2V, 5962-87515073A Datasheet - Page 3

• Manufacturer Part Number: 5962-87515073A
• Manufacturer: E2V

Specifications of 5962-87515073A

• Organization: 8Kx8
• Interface Type: Parallel
• In System Programmable: In System/External
• Frequency (max): Not RequiredMHz
• Access Time (max): 35ns
• Package Type: LLCC
• Reprogramming Technique: UV
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (min): 4.5V
• Operating Supply Voltage (max): 5.5V
• Pin Count: 28
• Mounting: Surface Mount
• Operating Temp Range: -55C to 125C
• Operating Temperature Classification: Military
• Lead Free Status / RoHS Status: Supplier Unconfirmed

DSCC FORM 2234
APR 97
of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer Listing
(QML) certified and qualified manufacturer or a manufacturer who has been granted transitional certification to MIL-PRF-38535
may be processed as QML product in accordance with the manufacturer's approved program plan and qualifying activity
approval in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management (QM) plan may make
modifications to the requirements herein. These modifications shall not affect the PIN as described herein. A "Q" or "QML"
certification mark in accordance with MIL-PRF-38535 is required to identify when the QML flow option is used.
MIL-PRF-38535, appendix A and herein.
drawing shall be as specified on figure 2. When required in groups A, B, or C inspection (see 4.3), the devices shall be
programmed by the manufacturer prior to test in a checkerboard pattern or equivalent (a minimum of 50 percent of the total
number of bits programmed) or to any altered item drawing pattern which includes at least 25 percent of the total numbers of bits
programmed.
drawing.
as specified in table I and shall apply over the full case operating temperature range.
tests for each subgroup are described in table I.
2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part
2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text
3. REQUIREMENTS
3.1 Item requirements The individual item requirements shall be in accordance with MIL-PRF-38535, appendix A for non-JAN
3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in
3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.2 herein.
3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1.
3.2.3 Truth table. The truth table shall be as specified on figure 2.
3.2.3.1 Unprogrammed or erased devices. The truth table for unprogrammed devices for contracts involving no altered item
3.2.3.2 Programmed devices. The truth table for programmed devices shall be as specified by an attached altered item
3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are
3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical
DEFENSE SUPPLY CENTER COLUMBUS
DEPARTMENT OF DEFENSE SPECIFICATION
DEPARTMENT OF DEFENSE STANDARDS
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.
MIL-STD-883
MIL-STD-1835 -
MIL-HDBK-103 -
MIL-HDBK-780 -
2. APPLICABLE DOCUMENTS
(Copies of these documents are available online at
COLUMBUS, OHIO 43218-3990
MICROCIRCUIT DRAWING
STANDARD
-
Test Method Standard Microcircuits.
Interface Standard Electronic Component Case Outlines.
List of Standard Microcircuit Drawings.
Standard Microcircuit Drawings.
http://assist.daps.dla.mil/quicksearch/
SIZE
A
REVISION LEVEL
B
or
http://assist.daps.dla.mil
SHEET
5962-87515
3
or