MC44BS374T1AEF Freescale, MC44BS374T1AEF Datasheet - Page 20

• Manufacturer Part Number: MC44BS374T1AEF
• Manufacturer: Freescale

Specifications of MC44BS374T1AEF

• Lead Free Status / RoHS Status: Compliant

Characterization Measurement Conditions
Video Black Level
Audio signal: 1Khz, 205mVrms.
This is measured using a Rohde &
Schwarz AMFS Demodulator in B/G and
a HP8903A Audio Analyzer at 1kHz
Video Black Level
Audio signal: 50Hz to 15KHz, 100mV
This is measured using a Rohde &
Schwarz AMFS Demodulator in B/G and
a HP8903A.
Audio: 1Khz, adjustable level
Video Black Level
This is measured using a Rohde &
Schwarz AMFS UHF Demodulator in B/G
and a HP8903A Audio Analyzer at 1kHz.
The output level of the Audio analyzer is
varied to obtain a deviation of 50kHz
indicated on the Demodulator.
Audio: 1Khz, adjustable level
Video: EBU Color Bars
This is measured using a Rohde &
Schwarz AMFS Demodulator in B/G and
a HP8903A Audio Analyzer at 1kHz. The
output level of the Audio analyzer is
varied to obtain a Modulation Deviation of
25kHz indicated on the AMFS
Demodulator.
Device and Signals Set-up
Freescale Semiconductor, Inc.
MC44BS374T1/374T1A Advance Information
For More Information On This Product,
Table 7. Measurement Conditions
rms
Go to: www.freescale.com
Audio Frequency response
The audio signal 205mV at 1kHz is supplied by the Audio Analyzer,
and the FM demodulated signal deviation is indicated on the
Demodulator in Khz peak.
This value is then converted in% of FM deviation, based on specified
standards.
The audio signal 1KHz 100mV
demodulated by the Demodulator and the audio analyzer measures
the AC amplitude of this demodulated audio signal: this value is taken
as a reference (0dB).
The audio signal is then swept from 50Hz to 15KHz, and demodulated
AC amplitude is measured in dB relative to the 1KHz reference.
Audio pre-emphasis and de-emphasis circuits are engaged, all audio
analyzer filters are switched OFF.
The input arms detector of the Audio Analyzer converts the ac level of
the combined signal + noise + distortion to dc. It then removes the
fundamental signal (1kHz) after having measured the frequency. The
output rms detector converts the residual noise + distortion to dc. The
dc voltmeter measures both dc signals and calculates the ratio in% of
the two signals.
The Audio Analyzer alternately turns ON and OFF it's internal audio
source to make a measure of the Audio signal plus noise and then
another measure of only the noise.
The measurement is made using the internal CCIR468-2 Filter of the
Audio Analyzer together with the internal 30+/-2kHz (60dB/decade)
Lowpass filters.
The AMFS demodulator uses a quasi-parallel demodulation as is the
case in a normal TV set. In this mode the Nyquist filter is bypassed and
the video carrier is used without added delay to effectuate intercarrier
conversion. In this mode the phase noise information fully cancels out
and the true S/N can be measured.
Audio Modulation Depth
Audio Signal to Noise
Audio Distortion FM
ADist
=
ASN dB
(
Distorsion
(
)
=
Measurement Set-up
20
+
×
Noise
log
rms
(
Signal
)
is supplied by the Audio Analyzer,
⁄
(
Distorsion
+
Noise
+
)
⁄
Noise
(
Noise
+
)
Signal
)